Get started writing data

Use Telegraf to consume line protocol, and then write it to InfluxDB Cloud Serverless.

11. If you haven’t already, follow the instructions to download and install Telegraf.

12. Copy and save the home sensor data sample to a file on your local system–for example, home.lp.

    cat <<- EOF > home.lp
    home,room=Living\ Room temp=21.1,hum=35.9,co=0i 1719924000
    home,room=Kitchen temp=21.0,hum=35.9,co=0i 1719924000
    home,room=Living\ Room temp=21.4,hum=35.9,co=0i 1719927600
    home,room=Kitchen temp=23.0,hum=36.2,co=0i 1719927600
    home,room=Living\ Room temp=21.8,hum=36.0,co=0i 1719931200
    home,room=Kitchen temp=22.7,hum=36.1,co=0i 1719931200
    home,room=Living\ Room temp=22.2,hum=36.0,co=0i 1719934800
    home,room=Kitchen temp=22.4,hum=36.0,co=0i 1719934800
    home,room=Living\ Room temp=22.2,hum=35.9,co=0i 1719938400
    home,room=Kitchen temp=22.5,hum=36.0,co=0i 1719938400
    home,room=Living\ Room temp=22.4,hum=36.0,co=0i 1719942000
    home,room=Kitchen temp=22.8,hum=36.5,co=1i 1719942000
    home,room=Living\ Room temp=22.3,hum=36.1,co=0i 1719945600
    home,room=Kitchen temp=22.8,hum=36.3,co=1i 1719945600
    home,room=Living\ Room temp=22.3,hum=36.1,co=1i 1719949200
    home,room=Kitchen temp=22.7,hum=36.2,co=3i 1719949200
    home,room=Living\ Room temp=22.4,hum=36.0,co=4i 1719952800
    home,room=Kitchen temp=22.4,hum=36.0,co=7i 1719952800
    home,room=Living\ Room temp=22.6,hum=35.9,co=5i 1719956400
    home,room=Kitchen temp=22.7,hum=36.0,co=9i 1719956400
    home,room=Living\ Room temp=22.8,hum=36.2,co=9i 1719960000
    home,room=Kitchen temp=23.3,hum=36.9,co=18i 1719960000
    home,room=Living\ Room temp=22.5,hum=36.3,co=14i 1719963600
    home,room=Kitchen temp=23.1,hum=36.6,co=22i 1719963600
    home,room=Living\ Room temp=22.2,hum=36.4,co=17i 1719967200
    home,room=Kitchen temp=22.7,hum=36.5,co=26i 1719967200
    EOF
    

    • Copy
    • Fill window

13. Run the following command to generate a Telegraf configuration file (./telegraf.conf) that enables the inputs.file and outputs.influxdb_v2 plugins:

    telegraf --sample-config \
      --input-filter file \
      --output-filter influxdb_v2 \
      > telegraf.conf
    

    • Copy
    • Fill window

14. In your editor, open ./telegraf.conf and configure the following:

    • file input plugin: In the [[inputs.file]].files list, replace "/tmp/metrics.out" with your sample data filename. If Telegraf can’t find a file when started, it stops processing and exits.

      [[inputs.file]]
        ## Files to parse each interval.  Accept standard unix glob matching rules,
        ## as well as ** to match recursive files and directories.
        files = ["home.lp"]
      

      • Copy
      • Fill window

    • output-influxdb_v2 output plugin: In the [[outputs.influxdb_v2]] section, replace the default values with the following configuration for your InfluxDB Cloud Serverless bucket:

      [[outputs.influxdb_v2]]
        # InfluxDB Cloud Serverless URL
        urls = ["${INFLUX_HOST}"]
      
        # INFLUX_TOKEN is an environment variable you assigned to your API token
        token = "${INFLUX_TOKEN}"
      
        # An empty string (InfluxDB ignores this parameter)
        organization = ""
      
        # Bucket name
        bucket = "get-started"
      

      • Copy
      • Fill window

      The example configuration uses the following InfluxDB credentials:

      • urls: an array containing your INFLUX_HOST environment variable
      • token: your INFLUX_TOKEN environment variable
      • organization: an empty string (InfluxDB ignores this parameter)
      • bucket: the name of the bucket to write to

15. To write the data, start the telegraf daemon with the following options:

    • --config: Specifies the path of the configuration file.
    • --once: Runs a single Telegraf collection cycle for the configured inputs and outputs, and then exits.

    Enter the following command in your terminal:

    telegraf --once --config ./telegraf.conf
    

    • Copy
    • Fill window

    If the write is successful, the output is similar to the following:

    2023-05-31T20:09:08Z D! [agent] Starting service inputs
    2023-05-31T20:09:19Z D! [outputs.influxdb_v2] Wrote batch of 52 metrics in 348.008167ms
    2023-05-31T20:09:19Z D! [outputs.influxdb_v2] Buffer fullness: 0 / 10000 metrics
    

    • Copy
    • Fill window

Telegraf and its plugins provide many options for reading and writing data. To learn more, see how to use Telegraf to write data.

Write data with your existing workloads that already use the InfluxDB v1 /write API endpoint.

To write data to InfluxDB using the InfluxDB v1 HTTP API, send a request to the InfluxDB API /write endpoint using the POST request method.

POST https://cloud2.influxdata.com/write

Include the following with your request:

• Headers:
  • Authorization: Token <INFLUX_TOKEN>
  • Content-Type: text/plain; charset=utf-8
  • Accept: application/json
• Query parameters:
  • db: InfluxDB bucket name
  • precision:timestamp precision (default is ns)
  • rp: retention policy name (default is the default DBRP mapping, if it exists, for the namespace; otherwise, an auto-generated DBRP mapping).
• Request body: Line protocol as plain text

The following example uses cURL and the InfluxDB v1 API to write line protocol to InfluxDB. Given that API_TOKEN is an All-Access API token, InfluxDB creates a bucket named get-started/autogen and an autogen DBRP mapping, and then writes the data to the bucket.

response=$(curl --silent --write-out "%{response_code}:-%{errormsg}" \
  "https://cloud2.influxdata.com/write?db=get-started&precision=s" \
  --header "Authorization: Token API_TOKEN" \
  --header "Content-type: text/plain; charset=utf-8" \
  --header "Accept: application/json" \
  --data-binary "
home,room=Living\ Room temp=21.1,hum=35.9,co=0i 1747382400
home,room=Kitchen temp=21.0,hum=35.9,co=0i 1747382400
home,room=Living\ Room temp=21.4,hum=35.9,co=0i 1747386000
home,room=Kitchen temp=23.0,hum=36.2,co=0i 1747386000
home,room=Living\ Room temp=21.8,hum=36.0,co=0i 1747389600
home,room=Kitchen temp=22.7,hum=36.1,co=0i 1747389600
home,room=Living\ Room temp=22.2,hum=36.0,co=0i 1747393200
home,room=Kitchen temp=22.4,hum=36.0,co=0i 1747393200
home,room=Living\ Room temp=22.2,hum=35.9,co=0i 1747396800
home,room=Kitchen temp=22.5,hum=36.0,co=0i 1747396800
home,room=Living\ Room temp=22.4,hum=36.0,co=0i 1747400400
home,room=Kitchen temp=22.8,hum=36.5,co=1i 1747400400
home,room=Living\ Room temp=22.3,hum=36.1,co=0i 1747404000
home,room=Kitchen temp=22.8,hum=36.3,co=1i 1747404000
home,room=Living\ Room temp=22.3,hum=36.1,co=1i 1747407600
home,room=Kitchen temp=22.7,hum=36.2,co=3i 1747407600
home,room=Living\ Room temp=22.4,hum=36.0,co=4i 1747411200
home,room=Kitchen temp=22.4,hum=36.0,co=7i 1747411200
home,room=Living\ Room temp=22.6,hum=35.9,co=5i 1747414800
home,room=Kitchen temp=22.7,hum=36.0,co=9i 1747414800
home,room=Living\ Room temp=22.8,hum=36.2,co=9i 1747418400
home,room=Kitchen temp=23.3,hum=36.9,co=18i 1747418400
home,room=Living\ Room temp=22.5,hum=36.3,co=14i 1747422000
home,room=Kitchen temp=23.1,hum=36.6,co=22i 1747422000
home,room=Living\ Room temp=22.2,hum=36.4,co=17i 1747425600
home,room=Kitchen temp=22.7,hum=36.5,co=26i 1747425600
")

# Format the response code and error message output.
response_code=${response%%:-*}
errormsg=${response#*:-}

# Remove leading and trailing whitespace from errormsg
errormsg=$(echo "${errormsg}" | tr -d '[:space:]')

echo "$response_code"
if [[ $errormsg ]]; then
  echo "$response"
fi

Replace the following:

• API_TOKEN: a token with sufficient permissions to the specified bucket. For InfluxDB to auto-generate the DBRP mapping, you must use an All-Access API token in the write request.

If successful, the output is an HTTP 204 No Content status code; otherwise, the error status code and failure message.

204

To write data to InfluxDB using the InfluxDB v2 HTTP API, send a request to the InfluxDB API /api/v2/write endpoint using the POST request method.

POST https://cloud2.influxdata.com/api/v2/write

Include the following with your request:

• Headers:
  • Authorization: Token <INFLUX_TOKEN>
  • Content-Type: text/plain; charset=utf-8
  • Accept: application/json
• Query parameters:
  • bucket: InfluxDB bucket name
  • precision: timestamp precision (default is ns)
• Request body: Line protocol as plain text

The following example uses cURL and the InfluxDB v2 API to write line protocol to InfluxDB:

response=$(curl --silent --write-out "%{response_code}:-%{errormsg}" \
  "https://cloud2.influxdata.com/api/v2/write?bucket=get-started&precision=s" \
  --header "Authorization: Token DATABASE_TOKEN" \
  --header "Content-Type: text/plain; charset=utf-8" \
  --header "Accept: application/json" \
  --data-binary "
home,room=Living\ Room temp=21.1,hum=35.9,co=0i 1747382400
home,room=Kitchen temp=21.0,hum=35.9,co=0i 1747382400
home,room=Living\ Room temp=21.4,hum=35.9,co=0i 1747386000
home,room=Kitchen temp=23.0,hum=36.2,co=0i 1747386000
home,room=Living\ Room temp=21.8,hum=36.0,co=0i 1747389600
home,room=Kitchen temp=22.7,hum=36.1,co=0i 1747389600
home,room=Living\ Room temp=22.2,hum=36.0,co=0i 1747393200
home,room=Kitchen temp=22.4,hum=36.0,co=0i 1747393200
home,room=Living\ Room temp=22.2,hum=35.9,co=0i 1747396800
home,room=Kitchen temp=22.5,hum=36.0,co=0i 1747396800
home,room=Living\ Room temp=22.4,hum=36.0,co=0i 1747400400
home,room=Kitchen temp=22.8,hum=36.5,co=1i 1747400400
home,room=Living\ Room temp=22.3,hum=36.1,co=0i 1747404000
home,room=Kitchen temp=22.8,hum=36.3,co=1i 1747404000
home,room=Living\ Room temp=22.3,hum=36.1,co=1i 1747407600
home,room=Kitchen temp=22.7,hum=36.2,co=3i 1747407600
home,room=Living\ Room temp=22.4,hum=36.0,co=4i 1747411200
home,room=Kitchen temp=22.4,hum=36.0,co=7i 1747411200
home,room=Living\ Room temp=22.6,hum=35.9,co=5i 1747414800
home,room=Kitchen temp=22.7,hum=36.0,co=9i 1747414800
home,room=Living\ Room temp=22.8,hum=36.2,co=9i 1747418400
home,room=Kitchen temp=23.3,hum=36.9,co=18i 1747418400
home,room=Living\ Room temp=22.5,hum=36.3,co=14i 1747422000
home,room=Kitchen temp=23.1,hum=36.6,co=22i 1747422000
home,room=Living\ Room temp=22.2,hum=36.4,co=17i 1747425600
home,room=Kitchen temp=22.7,hum=36.5,co=26i 1747425600
")

# Format the response code and error message output.
response_code=${response%%:-*}
errormsg=${response#*:-}

# Remove leading and trailing whitespace from errormsg
errormsg=$(echo "${errormsg}" | tr -d '[:space:]')

echo "$response_code"
if [[ $errormsg ]]; then
  echo "$errormsg"
fi

Replace the following:

• API_TOKEN: a token with sufficient permissions to the specified bucket

If successful, the output is an HTTP 204 No Content status code; otherwise, the error status code and failure message.

204

To write data to InfluxDB Cloud Serverless using Python, use the influxdb_client_3 module. The following steps include setting up a Python virtual environment to scope dependencies to your current project.

1. Create a module directory and navigate into it–for example:

   mkdir -p influxdb_py_client && cd influxdb_py_client
   

   • Copy
   • Fill window

2. Setup your Python virtual environment. Inside of your module directory:

   python -m venv envs/virtual-env
   

   • Copy
   • Fill window

3. Activate the virtual environment.

   source ./envs/virtual-env/bin/activate
   

   • Copy
   • Fill window

4. Install the client library package:

   pip install influxdb3-python
   

   • Copy
   • Fill window

The influxdb3-python package provides the influxdb_client_3 module and also installs the pyarrow package for working with Arrow data returned from queries.

5. In your terminal or editor, create a new file for your code–for example: write.py.

   touch write.py
   

   • Copy
   • Fill window

6. Inside of write.py, enter the following sample code:

   from influxdb_client_3 import InfluxDBClient3
   import os
   
   # INFLUX_TOKEN is an environment variable you assigned to your
   # API WRITE token value.
   token = os.getenv('INFLUX_TOKEN')
   
   # host is the URL hostname without protocol or trailing slash
   client = InfluxDBClient3(
       host='cloud2.influxdata.com',
       token=token,
       database='get-started'
   )
   
   lines = [
       "home,room=Living\ Room temp=21.1,hum=35.9,co=0i 1719924000",
       "home,room=Kitchen temp=21.0,hum=35.9,co=0i 1719924000",
       "home,room=Living\ Room temp=21.4,hum=35.9,co=0i 1719927600",
       "home,room=Kitchen temp=23.0,hum=36.2,co=0i 1719927600",
       "home,room=Living\ Room temp=21.8,hum=36.0,co=0i 1719931200",
       "home,room=Kitchen temp=22.7,hum=36.1,co=0i 1719931200",
       "home,room=Living\ Room temp=22.2,hum=36.0,co=0i 1719934800",
       "home,room=Kitchen temp=22.4,hum=36.0,co=0i 1719934800",
       "home,room=Living\ Room temp=22.2,hum=35.9,co=0i 1719938400",
       "home,room=Kitchen temp=22.5,hum=36.0,co=0i 1719938400",
       "home,room=Living\ Room temp=22.4,hum=36.0,co=0i 1719942000",
       "home,room=Kitchen temp=22.8,hum=36.5,co=1i 1719942000",
       "home,room=Living\ Room temp=22.3,hum=36.1,co=0i 1719945600",
       "home,room=Kitchen temp=22.8,hum=36.3,co=1i 1719945600",
       "home,room=Living\ Room temp=22.3,hum=36.1,co=1i 1719949200",
       "home,room=Kitchen temp=22.7,hum=36.2,co=3i 1719949200",
       "home,room=Living\ Room temp=22.4,hum=36.0,co=4i 1719952800",
       "home,room=Kitchen temp=22.4,hum=36.0,co=7i 1719952800",
       "home,room=Living\ Room temp=22.6,hum=35.9,co=5i 1719956400",
       "home,room=Kitchen temp=22.7,hum=36.0,co=9i 1719956400",
       "home,room=Living\ Room temp=22.8,hum=36.2,co=9i 1719960000",
       "home,room=Kitchen temp=23.3,hum=36.9,co=18i 1719960000",
       "home,room=Living\ Room temp=22.5,hum=36.3,co=14i 1719963600",
       "home,room=Kitchen temp=23.1,hum=36.6,co=22i 1719963600",
       "home,room=Living\ Room temp=22.2,hum=36.4,co=17i 1719967200",
       "home,room=Kitchen temp=22.7,hum=36.5,co=26i 1719967200"
   ]
   
   client.write(lines,write_precision='s')
   

   • Copy
   • Fill window

   The sample does the following:

   1. Imports the InfluxDBClient3 object from the influxdb_client_3 module.

   2. Calls the InfluxDBClient3() constructor to instantiate an InfluxDB client configured with the following credentials:

      • host: InfluxDB Cloud Serverless region hostname (URL without protocol or trailing slash)
      • token: a token with write access to the specified bucket. Store this in a secret store or environment variable to avoid exposing the raw token string.
      • database: the name of the InfluxDB Cloud Serverless bucket to write to

   3. Defines a list of line protocol strings where each string represents a data record.

   4. Calls the client.write() method with the line protocol record list and write options.

      Because the timestamps in the sample line protocol are in second precision, the example passes the write_precision='s' option to set the timestamp precision to seconds.

7. To execute the module and write line protocol to your InfluxDB Cloud Serverless bucket, enter the following command in your terminal:

   python write.py
   

   • Copy
   • Fill window

To write data to InfluxDB Cloud Serverless using Go, use the InfluxDB 3 influxdb3-go client library package.

1. Inside of your project directory, create a new module directory and navigate into it.

   mkdir -p influxdb_go_client && cd influxdb_go_client
   

   • Copy
   • Fill window

2. Initialize a new Go module in the directory.

   go mod init influxdb_go_client
   

   • Copy
   • Fill window

3. In your terminal or editor, create a new file for your code–for example: write.go.

   touch write.go
   

   • Copy
   • Fill window

4. Inside of write.go, enter the following sample code:

   package main
   
   import (
     "context"
     "os"
     "fmt"
     "log"
   
     "github.com/InfluxCommunity/influxdb3-go/v2/influxdb3"
   )
   
   // Write line protocol data to InfluxDB
   func WriteLineProtocol() error {
     // INFLUX_TOKEN is an environment variable you assigned to your
     // API WRITE token value.
     token := os.Getenv("INFLUX_TOKEN")
     database := os.Getenv("INFLUX_DATABASE")
   
     // Initialize a client with URL and token,
     // and set the timestamp precision for writes.
     client, err := influxdb3.New(influxdb3.ClientConfig{
       Host:     "https://cloud2.influxdata.com",
       Token:    token,
       Database: database,
         WriteOptions: &influxdb3.WriteOptions{Precision: lineprotocol.Second},
     })
   
     // Close the client when the function returns.
     defer func(client *influxdb3.Client) {
       err := client.Close()
       if err != nil {
         panic(err)
       }
     }(client)
   
     // Define line protocol records to write.
     // Use a raw string literal (denoted by backticks)
     // to preserve backslashes and prevent interpretation
     // of escape sequences--for example, escaped spaces in tag values.
     lines := [...]string{
       `home,room=Living\ Room temp=21.1,hum=35.9,co=0i 1719124000`,
       `home,room=Kitchen temp=21.0,hum=35.9,co=0i 1719124000`,
       `home,room=Living\ Room temp=21.4,hum=35.9,co=0i 1719127600`,
       `home,room=Kitchen temp=23.0,hum=36.2,co=0i 1719127600`,
       `home,room=Living\ Room temp=21.8,hum=36.0,co=0i 1719131200`,
       `home,room=Kitchen temp=22.7,hum=36.1,co=0i 1719131200`,
       `home,room=Living\ Room temp=22.2,hum=36.0,co=0i 1719134800`,
       `home,room=Kitchen temp=22.4,hum=36.0,co=0i 1719134800`,
       `home,room=Living\ Room temp=22.2,hum=35.9,co=0i 1719138400`,
       `home,room=Kitchen temp=22.5,hum=36.0,co=0i 1719138400`,
       `home,room=Living\ Room temp=22.4,hum=36.0,co=0i 1719142000`,
       `home,room=Kitchen temp=22.8,hum=36.5,co=1i 1719142000`,
       `home,room=Living\ Room temp=22.3,hum=36.1,co=0i 1719145600`,
       `home,room=Kitchen temp=22.8,hum=36.3,co=1i 1719145600`,
       `home,room=Living\ Room temp=22.3,hum=36.1,co=1i 1719149200`,
       `home,room=Kitchen temp=22.7,hum=36.2,co=3i 1719149200`,
       `home,room=Living\ Room temp=22.4,hum=36.0,co=4i 1719152800`,
       `home,room=Kitchen temp=22.4,hum=36.0,co=7i 1719152800`,
       `home,room=Living\ Room temp=22.6,hum=35.9,co=5i 1719156400`,
       `home,room=Kitchen temp=22.7,hum=36.0,co=9i 1719156400`,
       `home,room=Living\ Room temp=22.8,hum=36.2,co=9i 1719160000`,
       `home,room=Kitchen temp=23.3,hum=36.9,co=18i 1719160000`,
       `home,room=Living\ Room temp=22.5,hum=36.3,co=14i 1719163600`,
       `home,room=Kitchen temp=23.1,hum=36.6,co=22i 1719163600`,
       `home,room=Living\ Room temp=22.2,hum=36.4,co=17i 1719167200`,
       `home,room=Kitchen temp=22.7,hum=36.5,co=26i 1719167200`,
     }
   
     // Iterate over the lines array and write each line
     // separately to InfluxDB
     for _, record := range lines {
       err = client.Write(context.Background(), []byte(record))
       if err != nil {
         log.Fatalf("Error writing line protocol: %v", err)
       }
     }
   
     if err != nil {
       panic(err)
     }
   
     fmt.Println("Data has been written successfully.")
     return nil
   }
   

   • Copy
   • Fill window

   The sample does the following:

   1. Imports required packages.

   2. Defines a WriteLineProtocol() function that does the following:

      1. To instantiate the client, calls the influxdb3.New(influxdb3.ClientConfig) function and passes the following:

         • Host: your InfluxDB Cloud Serverless region URL

         • Token: a token with write access to the specified bucket. Store this in a secret store or environment variable to avoid exposing the raw token string.

         • WriteOptions: influxdb3.WriteOptions options for writing to InfluxDB.

           Because the timestamps in the sample line protocol are in second precision, the example passes the Precision: lineprotocol.Second option to set the timestamp precision to seconds.

      2. Defines a deferred function that closes the client when the function returns.

      3. Defines an array of line protocol strings where each string represents a data record.

      4. Iterates through the array of line protocol and calls the write client’s Write() method to write each line of line protocol separately to InfluxDB.

5. In your editor, create a main.go file and enter the following sample code that calls the WriteLineProtocol() function:

   package main
   
   // Module main function
   func main() {
     WriteLineProtocol()
   }
   

   • Copy
   • Fill window

6. To install dependencies and write the data to your InfluxDB Cloud Serverless bucket, enter the following command into your terminal:

   go mod tidy && go run influxdb_go_client
   

   • Copy
   • Fill window

If successful, the output is the success message; otherwise, error details and the failure message.

1. If you haven’t already, follow the instructions for Downloading and installing Node.js and npm for your system.

2. In your terminal, enter the following command to create a influxdb_js_client directory for your project:

   mkdir influxdb_js_client && cd influxdb_js_client
   

   • Copy
   • Fill window

3. Inside of influxdb_js_client, enter the following command to initialize a package. This example configures the package to use ECMAScript modules (ESM).

   npm init -y; npm pkg set type="module"
   

   • Copy
   • Fill window

4. Install the @influxdata/influxdb3-client JavaScript client library as a dependency to your project.

   npm install --save @influxdata/influxdb3-client
   

   • Copy
   • Fill window

5. In your terminal or editor, create a write.js file.

   touch write.js
   

   • Copy
   • Fill window

6. Inside of write.js, enter the following sample code:

   // write.js
   import { InfluxDBClient } from "@influxdata/influxdb3-client";
   
   /**
    * Set InfluxDB credentials.
    */
   const host = 'cloud2.influxdata.com';
   const database = 'get-started';
   /**
   * INFLUX_TOKEN is an environment variable you assigned to your
   * API WRITE token value.
   */
   const token = process.env.INFLUX_TOKEN;
   
   /**
   * Write line protocol to InfluxDB using the JavaScript client library.
   */
   export async function writeLineProtocol() {
     /**
     * Instantiate an InfluxDBClient
     */
     const client = new InfluxDBClient({ host, token });
   
     /**
     * Define line protocol records to write.
     */
     const records = [
       `home,room=Living\\ Room temp=21.1,hum=35.9,co=0i 1719124000`,
       `home,room=Kitchen temp=21.0,hum=35.9,co=0i 1719124000`,
       `home,room=Living\\ Room temp=21.4,hum=35.9,co=0i 1719127600`,
       `home,room=Kitchen temp=23.0,hum=36.2,co=0 1719127600`,
       `home,room=Living\\ Room temp=21.8,hum=36.0,co=0i 1719131200`,
       `home,room=Kitchen temp=22.7,hum=36.1,co=0i 1719131200`,
       `home,room=Living\\ Room temp=22.2,hum=36.0,co=0i 1719134800`,
       `home,room=Kitchen temp=22.4,hum=36.0,co=0i 1719134800`,
       `home,room=Living\\ Room temp=22.2,hum=35.9,co=0i 1719138400`,
       `home,room=Kitchen temp=22.5,hum=36.0,co=0i 1719138400`,
       `home,room=Living\\ Room temp=22.4,hum=36.0,co=0i 1719142000`,
       `home,room=Kitchen temp=22.8,hum=36.5,co=1i 1719142000`,
       `home,room=Living\\ Room temp=22.3,hum=36.1,co=0i 1719145600`,
       `home,room=Kitchen temp=22.8,hum=36.3,co=1i 1719145600`,
       `home,room=Living\\ Room temp=22.3,hum=36.1,co=1i 1719149200`,
       `home,room=Kitchen temp=22.7,hum=36.2,co=3i 1719149200`,
       `home,room=Living\\ Room temp=22.4,hum=36.0,co=4i 1719152800`,
       `home,room=Kitchen temp=22.4,hum=36.0,co=7i 1719152800`,
       `home,room=Living\\ Room temp=22.6,hum=35.9,co=5i 1719156400`,
       `home,room=Kitchen temp=22.7,hum=36.0,co=9i 1719156400`,
       `home,room=Living\\ Room temp=22.8,hum=36.2,co=9i 1719160000`,
       `home,room=Kitchen temp=23.3,hum=36.9,co=18i 1719160000`,
       `home,room=Living\\ Room temp=22.5,hum=36.3,co=14i 1719163600`,
       `home,room=Kitchen temp=23.1,hum=36.6,co=22i 1719163600`,
       `home,room=Living\\ Room temp=22.2,hum=36.4,co=17i 1719167200`,
       `home,room=Kitchen temp=22.7,hum=36.5,co=26i 1719167200`,
     ];
   
     /**
     * Creates an array that contains separate write request promises
     * for all the records.
     */
     const writePromises = records.map((record) => {
       return client.write(record, database, "", { precision: "s" })
       .then(() => `Data has been written successfully: ${record}`,
             () => `Failed writing data: ${record}`);
     });
   
     /**
     * Wait for all the write promises to settle, and then output the results.
     */  
     const writeResults = await Promise.allSettled(writePromises);
     writeResults.forEach(write => console.log(write.value));
   
     /** Close the client to release resources. */
     await client.close();
   }
   

   • Copy
   • Fill window

   The sample code does the following:

   1. Imports the InfluxDBClient class.

   2. Calls the new InfluxDBClient() constructor and passes a ClientOptions object to instantiate a client configured with InfluxDB credentials.

      • host: your InfluxDB Cloud Serverless region URL
      • token: a token with write access to the specified bucket. Store this in a secret store or environment variable to avoid exposing the raw token string.

   3. Defines a list of line protocol strings where each string represents a data record.

   4. Calls the client’s write() method for each record, defines the success or failure message to return, and collects the pending promises into the writePromises array. Each call to write() passes the following arguments:

      • record: the line protocol record
      • database: the name of the InfluxDB Cloud Serverless bucket to write to
      • {precision}: a WriteOptions object that sets the precision value.

      Because the timestamps in the sample line protocol are in second precision, the example passes s as the precision value to set the write timestamp precision to seconds.

   5. Calls Promise.allSettled() with the promises array to pause execution until the promises have completed, and then assigns the array containing success and failure messages to a writeResults constant.

   6. Iterates over and prints the messages in writeResults.

   7. Closes the client to release resources.

7. In your terminal or editor, create an index.js file.

8. Inside of index.js, enter the following sample code to import and call writeLineProtocol():

   // index.js
   import { writeLineProtocol } from "./write.js";
   
   /**
   * Execute the client functions.
   */
   async function main() {
     /** Write line protocol data to InfluxDB. */
     await writeLineProtocol();
   }
   
   main();
   

   • Copy
   • Fill window

9. In your terminal, execute index.mjs to write to InfluxDB Cloud Serverless:

   node index.js
   

   • Copy
   • Fill window

1. If you haven’t already, follow the Microsoft.com download instructions to install .NET and the dotnet CLI.

2. In your terminal, create an executable C# project using the .NET console template.

   dotnet new console --name influxdb_csharp_client
   

   • Copy
   • Fill window

3. Change into the generated influxdb_csharp_client directory.

   cd influxdb_csharp_client
   

   • Copy
   • Fill window

4. Run the following command to install the latest version of the InfluxDB 3 C# client library.

   dotnet add package InfluxDB3.Client
   

   • Copy
   • Fill window

5. In your editor, create a Write.cs file and enter the following sample code:

   // Write.cs
   
   using System;
   using System.Threading.Tasks;
   using InfluxDB3.Client;
   using InfluxDB3.Client.Query;
   
   namespace InfluxDBv3;
   
   public class Write
   {
     /**
       * Writes line protocol to InfluxDB using the C# .NET client
       * library.
       */
     public static async Task WriteLines()
     {
       // Set InfluxDB credentials
       const string host = "https://cloud2.influxdata.com";
       string? database = "get-started";
   
       /**
         * INFLUX_TOKEN is an environment variable you assigned to your
         * WRITE token value.
         */
       string? token = System.Environment
           .GetEnvironmentVariable("INFLUX_TOKEN");
   
       // Instantiate the InfluxDB client with credentials.
       using var client = new InfluxDBClient(
           host, token: token, database: database);
   
       /** 
         * Define an array of line protocol strings to write.
         * Include an additional backslash to preserve backslashes
         * and prevent interpretation of escape sequences---for example,
         * escaped spaces in tag values.
         */
       string[] lines = new string[] {
             "home,room=Living\\ Room temp=21.1,hum=35.9,co=0i 1719924000",
             "home,room=Kitchen temp=21.0,hum=35.9,co=0i 1719924000",
             "home,room=Living\\ Room temp=21.4,hum=35.9,co=0i 1719927600",
             "home,room=Kitchen temp=23.0,hum=36.2,co=0i 1719927600",
             "home,room=Living\\ Room temp=21.8,hum=36.0,co=0i 1719931200",
             "home,room=Kitchen temp=22.7,hum=36.1,co=0i 1719931200",
             "home,room=Living\\ Room temp=22.2,hum=36.0,co=0i 1719934800",
             "home,room=Kitchen temp=22.4,hum=36.0,co=0i 1719934800",
             "home,room=Living\\ Room temp=22.2,hum=35.9,co=0i 1719938400",
             "home,room=Kitchen temp=22.5,hum=36.0,co=0i 1719938400",
             "home,room=Living\\ Room temp=22.4,hum=36.0,co=0i 1719942000",
             "home,room=Kitchen temp=22.8,hum=36.5,co=1i 1719942000",
             "home,room=Living\\ Room temp=22.3,hum=36.1,co=0i 1719945600",
             "home,room=Kitchen temp=22.8,hum=36.3,co=1i 1719945600",
             "home,room=Living\\ Room temp=22.3,hum=36.1,co=1i 1719949200",
             "home,room=Kitchen temp=22.7,hum=36.2,co=3i 1719949200",
             "home,room=Living\\ Room temp=22.4,hum=36.0,co=4i 1719952800",
             "home,room=Kitchen temp=22.4,hum=36.0,co=7i 1719952800",
             "home,room=Living\\ Room temp=22.6,hum=35.9,co=5i 1719956400",
             "home,room=Kitchen temp=22.7,hum=36.0,co=9i 1719956400",
             "home,room=Living\\ Room temp=22.8,hum=36.2,co=9i 1719960000",
             "home,room=Kitchen temp=23.3,hum=36.9,co=18i 1719960000",
             "home,room=Living\\ Room temp=22.5,hum=36.3,co=14i 1719963600",
             "home,room=Kitchen temp=23.1,hum=36.6,co=22i 1719963600",
             "home,room=Living\\ Room temp=22.2,hum=36.4,co=17i 1719967200",
             "home,room=Kitchen temp=22.7,hum=36.5,co=26i 1719967200"
       };
   
       // Write each record separately.
       foreach (string line in lines)
       {
         // Write the record to InfluxDB with timestamp precision in seconds.
         await client.WriteRecordAsync(
             record: line, precision: WritePrecision.S);
         Console.WriteLine(
             "Data has been written successfully: {0,-30}", line);
       }
     }
   }
   

   • Copy
   • Fill window

   The sample does the following:

   1. Calls the new InfluxDBClient() constructor to instantiate a client configured with InfluxDB credentials.

      • host: your InfluxDB Cloud Serverless region URL
      • database: the name of the InfluxDB Cloud Serverless bucket to write to
      • token: a token with write access to the specified bucket. Store this in a secret store or environment variable to avoid exposing the raw token string.

      The using statement ensures that the program disposes of the client when it’s no longer needed.

   2. Defines an array of line protocol strings where each string represents a data record.

   3. Calls the client’s WriteRecordAsync() method to write each line protocol record to InfluxDB.

      Because the timestamps in the sample line protocol are in second precision, the example passes the WritePrecision.S enum value to the precision: option to set the timestamp precision to seconds.

6. In your editor, open the Program.cs file and replace its contents with the following:

   // Program.cs
   
   using System;
   using System.Threading.Tasks;
   
   namespace InfluxDBv3;
   
   public class Program
   {
     public static async Task Main()
     {
       await Write.WriteLineProtocol();
     }
   }
   

   • Copy
   • Fill window

   The Program class shares the same InfluxDBv3 namespace as the Write class you defined in the preceding step and defines a Main() function that calls Write.WriteLineProtocol(). The dotnet CLI recognizes Program.Main() as the entry point for your program.

7. To build and execute the program and write the line protocol to your InfluxDB Cloud Serverless bucket, enter the following command in your terminal:

   dotnet run
   

   • Copy
   • Fill window

If successful, the output is the success message; otherwise, error details and the failure message.

The tutorial assumes using Maven version 3.9 and Java version >= 15.

1. If you haven’t already, follow the instructions to download and install the Java JDK and Maven for your system.

2. In your terminal or editor, use Maven to generate a project–for example:

   mvn org.apache.maven.plugins:maven-archetype-plugin:3.1.2:generate \
   -DarchetypeArtifactId="maven-archetype-quickstart" \
   -DarchetypeGroupId="org.apache.maven.archetypes" -DarchetypeVersion="1.4" \
   -DgroupId="com.influxdbv3" -DartifactId="influxdb_java_client"
   -Dversion="1.0"
   

   • Copy
   • Fill window

   Maven creates the <artifactId> directory (./influxdb_java_client) that contains a pom.xml and scaffolding for your com.influxdbv3.influxdb_java_client Java application.

3. In your terminal or editor, change into the ./influxdb_java_client directory–for example:

   cd ./influxdb_java_client
   

   • Copy
   • Fill window

4. In your editor, open the pom.xml Maven configuration file and add the com.influxdb.influxdb3-java client library into dependencies.

   ...
   <dependencies>
     ...
     <dependency>
     <groupId>com.influxdb</groupId>
     <artifactId>influxdb3-java</artifactId>
     <version>0.1.0</version>
     </dependency>
     ...
   </dependencies>
   

   • Copy
   • Fill window

5. To check your pom.xml for problems, run Maven’s validate command–for example, enter the following in your terminal:

   mvn validate
   

   • Copy
   • Fill window

6. In your editor, navigate to the ./influxdb_java_client/src/main/java/com/influxdbv3 directory and create a Write.java file.

7. In Write.java, enter the following sample code:

   // Write.java
   package com.influxdbv3;
   
   import java.util.List;
   import com.influxdb.v3.client.InfluxDBClient;
   import com.influxdb.v3.client.write.WriteOptions;
   import com.influxdb.v3.client.write.WritePrecision;
   
   /**
     * Writes line protocol to InfluxDB using the Java client
     * library.
     */
   public final class Write {
       /**
       * Write data to InfluxDB 3.
       */
       private Write() {
           //not called
       }
   
       /**
         * @throws Exception
         */
       public static void writeLineProtocol() throws Exception {
   
           // Set InfluxDB credentials
           final String host = "https://cloud2.influxdata.com";
           final String database = "get-started";
   
           /**
             * INFLUX_TOKEN is an environment variable you assigned to your
             * WRITE token value.
             */
           final char[] token = (System.getenv("INFLUX_TOKEN")).
           toCharArray();
   
           // Instantiate the InfluxDB client.
           try (InfluxDBClient client = InfluxDBClient.getInstance(host,
           token, database)) {
               // Create a list of line protocol records.
               final List<String> records = List.of(
                 "home,room=Living\\ Room temp=21.1,hum=35.9,co=0i 1719924000",
                 "home,room=Kitchen temp=21.0,hum=35.9,co=0i 1719924000",
                 "home,room=Living\\ Room temp=21.4,hum=35.9,co=0i 1719927600",
                 "home,room=Kitchen temp=23.0,hum=36.2,co=0i 1719927600",
                 "home,room=Living\\ Room temp=21.8,hum=36.0,co=0i 1719931200",
                 "home,room=Kitchen temp=22.7,hum=36.1,co=0i 1719931200",
                 "home,room=Living\\ Room temp=22.2,hum=36.0,co=0i 1719934800",
                 "home,room=Kitchen temp=22.4,hum=36.0,co=0i 1719934800",
                 "home,room=Living\\ Room temp=22.2,hum=35.9,co=0i 1719938400",
                 "home,room=Kitchen temp=22.5,hum=36.0,co=0i 1719938400",
                 "home,room=Living\\ Room temp=22.4,hum=36.0,co=0i 1719942000",
                 "home,room=Kitchen temp=22.8,hum=36.5,co=1i 1719942000",
                 "home,room=Living\\ Room temp=22.3,hum=36.1,co=0i 1719945600",
                 "home,room=Kitchen temp=22.8,hum=36.3,co=1i 1719945600",
                 "home,room=Living\\ Room temp=22.3,hum=36.1,co=1i 1719949200",
                 "home,room=Kitchen temp=22.7,hum=36.2,co=3i 1719949200",
                 "home,room=Living\\ Room temp=22.4,hum=36.0,co=4i 1719952800",
                 "home,room=Kitchen temp=22.4,hum=36.0,co=7i 1719952800",
                 "home,room=Living\\ Room temp=22.6,hum=35.9,co=5i 1719956400",
                 "home,room=Kitchen temp=22.7,hum=36.0,co=9i 1719956400",
                 "home,room=Living\\ Room temp=22.8,hum=36.2,co=9i 1719960000",
                 "home,room=Kitchen temp=23.3,hum=36.9,co=18i 1719960000",
                 "home,room=Living\\ Room temp=22.5,hum=36.3,co=14i 1719963600",
                 "home,room=Kitchen temp=23.1,hum=36.6,co=22i 1719963600",
                 "home,room=Living\\ Room temp=22.2,hum=36.4,co=17i 1719967200",
                 "home,room=Kitchen temp=22.7,hum=36.5,co=26i 1719967200"
               );
   
               /**
                * Write each record separately to InfluxDB with timestamp
                * precision in seconds.
                * If no error occurs, print a success message.
                * */
               for (String record : records) {
                   client.writeRecord(record, new WriteOptions(null, null,
                   WritePrecision.S));
                   System.out.printf("Data has been written successfully:
                   %s%n", record);
               }
           }
       }
   }
   

   • Copy
   • Fill window

   The sample code does the following:

   1. Imports the following classes:

      • java.util.List;
      • com.influxdb.v3.client.InfluxDBClient
      • com.influxdb.v3.client.write.WriteParameters
      • com.influxdb.v3.client.write.WritePrecision

   2. Calls InfluxDBClient.getInstance() to instantiate a client configured with InfluxDB credentials.

      • host: your InfluxDB Cloud Serverless region URL
      • database: the name of the InfluxDB Cloud Serverless bucket to write to
      • token: a token with write access to the specified bucket. Store this in a secret store or environment variable to avoid exposing the raw token string.

   3. Defines a list of line protocol strings where each string represents a data record.

   4. Calls the client’s writeRecord() method to write each record separately to InfluxDB.

      Because the timestamps in the sample line protocol are in second precision, the example passes the WritePrecision.S enum value as the precision argument to set the write timestamp precision to seconds.

8. In your editor, open the App.java file (created by Maven) and replace its contents with the following sample code:

   // App.java
   
   package com.influxdbv3;
   
   /**
   * Execute the client functions.
   *
   */
   public class App {
   
       /**
       * @param args
       * @throws Exception
       */
       public static void main(final String[] args) throws Exception {
           // Write data to InfluxDB 3.
           Write.writeLineProtocol();
       }
   }
   

   • Copy
   • Fill window
   • The App class and Write class are part of the same com.influxdbv3 package (your project groupId).
   • App defines a main() function that calls Write.writeLineProtocol().

9. In your terminal or editor, use Maven to install dependencies and compile the project code–for example:

   mvn compile
   

   • Copy
   • Fill window

10. In your terminal or editor, execute App.main() to write to InfluxDB–for example, using Maven:

    mvn exec:java -Dexec.mainClass="com.influxdbv3.App"
    

    • Copy
    • Fill window

If successful, the output is the success message; otherwise, error details and the failure message.