Install Telegraf

This page provides directions for installing, starting, and configuring Telegraf. To install Telegraf, do the following:

Review requirements
Download and install Telegraf
Custom compile Telegraf

Requirements

Installation of the Telegraf package may require root or administrator privileges to complete successfully.

Networking

Telegraf offers multiple service input plugins that may require custom ports. Modify port mappings through the configuration file (telegraf.conf).

For Linux distributions, this file is located at /etc/telegraf for default installations.

For Windows distributions, the configuration file is located in the directory where you unzipped the Telegraf ZIP archive. The default location is C:\InfluxData\telegraf.

NTP

Telegraf uses a host’s local time in UTC to assign timestamps to data. Use the Network Time Protocol (NTP) to synchronize time between hosts. If hosts’ clocks aren’t synchronized with NTP, the timestamps on the data might be inaccurate.

Download and install Telegraf

Recommended:: Before you open and install packages and downloaded files, use SHA checksum verification and GPG signature verification to ensure the files are intact and authentic.

SHA checksum and GPG signature verification are complementary checks.

For some Linux platforms, the installation instructions include steps to verify downloaded packages and binaries.

For more information, see the following:

Verify download integrity using SHA-256

For each released binary, InfluxData publishes the SHA checksum that you can use to verify that the downloaded file is intact and hasn’t been corrupted.

To use the SHA checksum to verify the downloaded file, do the following:

In the downloads page, select the Version and Platform for your download, and then copy the SHA256 checksum for the file.
Compute the SHA checksum of the downloaded file and compare it to the checksum you copied in the preceding step–for example, enter the following command in your terminal.

Syntax

# Use 2 spaces to separate the checksum from the filename
echo "<SHA256_CHECKSUM>  telegraf-1.36.3_linux_amd64.tar.gz" \
| sha256sum -c -

Replace the following:

<SHA256_CHECKSUM>: the SHA256: checksum value that you copied from the downloads page

Example

The following sample code uses curl to download Telegraf, and then uses sha256 to compare it to the checksum:

curl -s --location -O \
"https://dl.influxdata.com/telegraf/releases/telegraf-1.36.3_linux_amd64.tar.gz"
echo "21e781cc2352713e4eabf0931e3eeea640a2014850a33ea04f86b4dc288d6add  telegraf-1.36.3_linux_amd64.tar.gz" \
| sha256sum -c -

Replace the following:

21e781cc2352713e4eabf0931e3eeea640a2014850a33ea04f86b4dc288d6add: the SHA256: checksum value that you copied from the downloads page

If the checksums match, the output is the following; otherwise, an error message.

telegraf-1.36.3_linux_amd64.tar.gz: OK

Verify file integrity and authenticity using GPG

Ubuntu & Debian RedHat & CentOS SLES & openSUSE FreeBSD/PC-BSD Linux binaries (AMD) Linux binaries (ARM) macOS Windows

Debian and Ubuntu users can install the latest stable version of Telegraf using the apt-get package manager.

Install from the InfluxData repository
Install from a .deb file

Install from the InfluxData repository

Run the following commands using apt-get to install Telegraf from the InfluxData repository:

Ubuntu 20.04 LTS and newer Older than Ubuntu 20.04

curl --silent --location -O https://repos.influxdata.com/influxdata-archive.key
gpg --show-keys --with-fingerprint --with-colons ./influxdata-archive.key 2>&1 \
| grep -q '^fpr:\+24C975CBA61A024EE1B631787C3D57159FC2F927:$' \
&& cat influxdata-archive.key \
| gpg --dearmor \
| sudo tee /etc/apt/keyrings/influxdata-archive.gpg > /dev/null \
&& echo 'deb [signed-by=/etc/apt/keyrings/influxdata-archive.gpg] https://repos.influxdata.com/debian stable main' \
| sudo tee /etc/apt/sources.list.d/influxdata.list
sudo apt-get update && sudo apt-get install telegraf

# influxdata-archive_compat.key GPG Fingerprint: 9D539D90D3328DC7D6C8D3B9D8FF8E1F7DF8B07E
curl --silent --location -O https://repos.influxdata.com/influxdata-archive_compat.key
gpg --show-keys --with-fingerprint --with-colons ./influxdata-archive_compat.key 2>&1 \
| grep -q '^fpr:\+9D539D90D3328DC7D6C8D3B9D8FF8E1F7DF8B07E:$' \
&& cat influxdata-archive_compat.key \
| gpg --dearmor \
| sudo tee /etc/apt/keyrings/influxdata-archive_compat.gpg > /dev/null
echo 'deb [signed-by=/etc/apt/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' \
| sudo tee /etc/apt/sources.list.d/influxdata.list
sudo apt-get update && sudo apt-get install telegraf

Install from a `.deb` file

To manually install the Debian package from a .deb file:

Download the latest Telegraf .deb release from the downloads page.
Run the following command (making sure to supply the correct version number for the downloaded file):
```
sudo dpkg -i telegraf_1.36.3-1_amd64.deb
```

To learn how to manually install the RPM package from a file, see the downloads page.

To use the yum package manager to install the latest stable version of Telegraf, follow these steps:

In your terminal, enter the following command to add the InfluxData repository to the yum configuration:

cat <<EOF | sudo tee /etc/yum.repos.d/influxdata.repo
[influxdata]
name = InfluxData Repository - Stable
baseurl = https://repos.influxdata.com/stable/$basearch/main
enabled = 1
gpgcheck = 1
gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-influxdata
EOF

Enter the following command to install telegraf from the repository.
```
sudo yum install telegraf
```

The telegraf configuration file is installed at /etc/telegraf/telegraf.conf.

The openSUSE Build Service provides RPM packages for SUSE Linux.

To use the zypper package manager to install the latest stable version of Telegraf, follow these steps:

In your terminal, enter the following command to add the Go repository to the zypper configuration:
```
# add go repository
zypper ar -f obs://devel:languages:go/ go
```
Enter the following command to install telegraf.
```
# install latest telegraf
zypper in telegraf
```

Telegraf is part of the FreeBSD package system.

To use the pkg package manager to install the latest stable version of Telegraf, enter the following command:

sudo pkg install telegraf

The telegraf configuration file is installed at /usr/local/etc/telegraf.conf. Examples are installed at /usr/local/etc/telegraf.conf.sample.

Choose from the following options to install Telegraf binary files for Linux AMD:

To install on Linux AMD32, see the downloads page.
Download and install on Linux AMD64

Download and install on Linux AMD64

curl -s --location -O \
https://dl.influxdata.com/telegraf/releases/telegraf-1.36.3_linux_amd64.tar.gz \
&& echo "21e781cc2352713e4eabf0931e3eeea640a2014850a33ea04f86b4dc288d6add  telegraf-1.36.3_linux_amd64.tar.gz" \
| sha256sum -c -

Replace the following:

21e781cc2352713e4eabf0931e3eeea640a2014850a33ea04f86b4dc288d6add: the SHA checksum from the downloads page

Choose from the following options to install Telegraf binary files for Linux ARM:

To install on Linux ARMv7(32-bit), see the downloads page.
Download and install on Linux ARMv8 (64-bit)

Download and install on Linux ARMv8

curl -s --location -O \
https://dl.influxdata.com/telegraf/releases/telegraf-1.36.3_linux_arm64.tar.gz \
&& echo "7782bbcf50e67e73229fd0703c532d733e4fa259aa4b246debd012421f65c969  telegraf-1.36.3_linux_arm64.tar.gz" \
| sha256sum -c -

Replace the following:

7782bbcf50e67e73229fd0703c532d733e4fa259aa4b246debd012421f65c969: the SHA checksum from the downloads page

Choose from the following options to install Telegraf for macOS:

To manually install Telegraf from a file, see the downloads page.
Install using Homebrew

Install using Homebrew

Users of macOS 10.8 and higher can install Telegraf using the Homebrew package manager.

The telegraf binary installed by Homebrew differs from the macOS .dmg builds available from the downloads page.

telegraf (Homebrew) isn’t a static binary.
telegraf (Homebrew) works with the Telegraf CPU plugin (due to Homebrew support for Cgo). The .dmg builds available on the downloads page don’t support the CPU plugin.

To install using Homebrew, do the following:

If you haven’t already, follow the instructions to install the Homebrew package manager.
Enter the following commands to update brew and install Telegraf:
```
brew update && brew install telegraf
```
The path where brew installs the telegraf.conf configuration file depends on your system architecture:
- ARM-based (Apple Silicon) systems: /opt/homebrew/etc/telegraf.conf
- Intel-based (x86_64) systems: /usr/local/etc/telegraf.conf
Choose one of the following methods to start Telegraf and begin collecting and processing metrics:
- Run Telegraf in your terminal
- Run Telegraf as a service

Run Telegraf in your terminal

To run telegraf in your terminal (in the foreground and not as a service), enter the following command:

ARM (Apple Silicon) x86_64 (Intel)

telegraf -config /opt/homebrew/etc/telegraf.conf

telegraf -config /usr/local/etc/telegraf.conf

Run Telegraf as a background service

In your terminal, enter the following command to add telegraf to your system’s LaunchAgents:

ARM (Apple Silicon) x86_64 (Intel)

ln -sfv /opt/homebrew/opt/telegraf/*.plist ~/Library/LaunchAgents

ln -sfv /usr/local/opt/telegraf/*.plist ~/Library/LaunchAgents

The next time you login, launchd starts the telegraf service.

To immediately start the telegraf service, enter the following command:

launchctl load ~/Library/LaunchAgents/homebrew.mxcl.telegraf.plist

Download and run Telegraf as a Windows service

Installing a Windows service requires administrative permissions. To run PowerShell as an administrator, see Launch PowerShell as administrator.

In PowerShell as an administrator, do the following:

Use the following commands to download the Telegraf Windows binary and extract its contents to C:\Program Files\InfluxData\telegraf\:

wget `
https://dl.influxdata.com/telegraf/releases/telegraf-1.36.3_windows_amd64.zip `
-UseBasicParsing `
-OutFile telegraf-1.36.3_windows_amd64.zip
Expand-Archive .\telegraf-1.36.3_windows_amd64.zip `
-DestinationPath 'C:\Program Files\InfluxData\telegraf\'

Choose one of the following steps to place your telegraf.exe and telegraf.conf files in C:\Program Files\InfluxData\telegraf:
- Move the telegraf.exe and telegraf.conf files from C:\Program Files\InfluxData\telegraf\telegraf-1.36.3 to the parent directory C:\Program Files\InfluxData\telegraf–for example:
```
cd "C:\Program Files\InfluxData\telegraf";
mv .\telegraf-1.36.3\telegraf.* .
```
- Or, create a Windows symbolic link (Symlink) for C:\Program Files\InfluxData\telegraf that points to the extracted directory.

The remaining instructions assume that telegraf.exe and telegraf.conf files are stored in C:\Program Files\InfluxData\telegraf or that you created a Symlink to point to this directory.

Optional: Enable a plugin to collect Windows-specific metrics–for example, uncomment the inputs.win_services plugin configuration line:
```
...
# # Input plugin to report Windows services info.
# # This plugin ONLY supports Windows
[[inputs.win_services]]
...
```
Run the following command to install Telegraf and the configuration as a Windows service. For the --config option, pass the absolute path of the telegraf.conf configuration file.
```
.\telegraf.exe --service install `
--config "C:\Program Files\InfluxData\telegraf\telegraf.conf"
```
To test that the installation works, enter the following command:
```
.\telegraf.exe `
--config C:\"Program Files"\InfluxData\telegraf\telegraf.conf --test
```
When run in test mode (using the --test flag), Telegraf runs once, collects metrics, outputs them to the console, and then exits. It doesn’t run processors, aggregators, or output plugins.
To start collecting data, run:
```
.\telegraf.exe --service start
```

Logging and troubleshooting

When Telegraf runs as a Windows service, Telegraf logs messages to Windows event logs. If the Telegraf service fails to start, view error logs by selecting Event Viewer→Windows Logs→Application.

Windows service commands

The following commands are available:

Command	Effect
`telegraf.exe --service install`	Install telegraf as a service
`telegraf.exe --service uninstall`	Remove the telegraf service
`telegraf.exe --service start`	Start the telegraf service
`telegraf.exe --service stop`	Stop the telegraf service

Generate a configuration file

The telegraf config command lets you generate a configuration file from Telegraf’s plugin list.

Create a configuration file with default input and output plugins
Create a configuration with specific input and output plugins

Create a configuration file with default input and output plugins

To generate a configuration file with default input and output plugins enabled, enter the following command in your terminal:

Linux and macOS Windows

telegraf config > telegraf.conf

.\telegraf.exe config > telegraf.conf

Create a configuration file with specific input and output plugins

To generate a configuration file that contains settings for only specific plugins, use the --input-filter and --output-filter options to specify input plugins and output plugins–for example:

Linux and macOS Windows

telegraf \
--input-filter cpu
:http
 \
--output-filter influxdb_v2
:file
 \
config > telegraf.conf

.\telegraf.exe `
--input-filter cpu:http `
--output-filter influxdb_v2:file `
config > telegraf.conf

For more advanced configuration details, see the configuration documentation.

Custom-compile Telegraf

Use the Telegraf custom builder tool to compile Telegraf with only the plugins you need and reduce the Telegraf binary size.

Prerequisites
Build the custom builder tool
Run the custom builder to create a telegraf binary

Prerequisites

Follow the instructions to install Go for your system.
Create your Telegraf configuration file with the plugins you want to use.

Build the custom builder tool

Clone the Telegraf repository and then change into the repository directory–for example, enter the following command in your terminal:
```
git clone https://github.com/influxdata/telegraf.git && cd ./telegraf
```
To build the Telegraf custom builder tool, enter the following command:
```
make build_tools
```

Run the custom builder to create a `telegraf` binary

The custom builder builds a telegraf binary with only the plugins included in the specified configuration files or directories.

Run the custom_builder tool with at least one --config or --config-directory flag to specify Telegraf configuration files to build from.

--config: accepts local file paths and URLs.
--config-dir: accepts local directory paths.

You can include multiple --config and --config-dir flags.

Examples

Single Telegraf configuration

./tools/custom_builder/custom_builder --config /etc/telegraf.conf

Single Telegraf configuration and Telegraf configuration directory

./tools/custom_builder/custom_builder \
--config /etc/telegraf.conf \
--config-dir /etc/telegraf/telegraf.d

Remote Telegraf configuration

./tools/custom_builder/custom_builder \
--config http://url-to-remote-telegraf/telegraf.conf

After a successful build, you can view your customized telegraf binary within the top level of your Telegraf repository.

Update your custom binary

To add or remove plugins from your customized Telegraf build, edit your configuration file, and then run the custom builder to regenerate the Telegraf binary.

Was this page helpful?

Thank you for your feedback!

Support and feedback

Thank you for being part of our community! We welcome and encourage your feedback and bug reports for Telegraf and this documentation. To find support, use the following resources:

Customers with an annual or support contract can contact InfluxData Support.

Edit this page Submit docs issue Submit Telegraf issue

Install Telegraf

Requirements

Networking

NTP

Download and install Telegraf

Syntax

Example

Install from the InfluxData repository

Install from a `.deb` file

Download and install on Linux AMD64

Download and install on Linux ARMv8

Install using Homebrew

Run Telegraf in your terminal

Run Telegraf as a background service

Download and run Telegraf as a Windows service

Logging and troubleshooting

Windows service commands

Generate a configuration file

Create a configuration file with default input and output plugins

Create a configuration file with specific input and output plugins

Custom-compile Telegraf

Prerequisites

Build the custom builder tool

Run the custom builder to create a `telegraf` binary

Examples

Single Telegraf configuration

Single Telegraf configuration and Telegraf configuration directory

Remote Telegraf configuration

Update your custom binary

Support and feedback

New in InfluxDB 3.5

InfluxDB Docker latest tag changing to InfluxDB 3 Core

Install Telegraf

Requirements

Networking

NTP

Download and install Telegraf

Syntax

Example

Install from the InfluxData repository

Install from a .deb file

Download and install on Linux AMD64

Download and install on Linux ARMv8

Install using Homebrew

Run Telegraf in your terminal

Run Telegraf as a background service

Download and run Telegraf as a Windows service

Logging and troubleshooting

Windows service commands

Generate a configuration file

Create a configuration file with default input and output plugins

Create a configuration file with specific input and output plugins

Custom-compile Telegraf

Prerequisites

Build the custom builder tool

Run the custom builder to create a telegraf binary

Examples

Single Telegraf configuration

Single Telegraf configuration and Telegraf configuration directory

Remote Telegraf configuration

Update your custom binary

Support and feedback

Where are you running InfluxDB?

AWS

GCP

Azure

Default

Custom

Thank you for your feedback!

New in InfluxDB 3.5

InfluxDB Docker latest tag changing to InfluxDB 3 Core

Install from a `.deb` file

Run the custom builder to create a `telegraf` binary