Log and trace with InfluxDB

This page documents an earlier version of InfluxDB. InfluxDB v2 is the latest stable version.


Logging locations

InfluxDB writes log output, by default, to stderr. Depending on your use case, this log information can be written to another location.

Running InfluxDB directly

When you run InfluxDB directly, using influxd, all logs are written to stderr. You can also redirect the log output, as you would any output to stderr, like in this example:

influxd 2>$HOME/my_log_file

Launched as a service


Most Linux systems direct logs to the systemd journal. To access these logs, use this command:

sudo journalctl -u influxdb.service

For more information, see the journald.conf manual page.


On Linux systems not using systemd, InfluxDB writes all log data and stderr to /var/log/influxdb/influxd.log. You can override this location by setting the environment variable STDERR in a start-up script at /etc/default/influxdb. (If this file doesn’t exist, you need to create it.)

For example, if /etc/default/influxdb contains:


all log data is discarded. Likewise, you can direct output to stdout by setting STDOUT in the same file. stdout is sent to /dev/null by default when InfluxDB is launched as a service.

InfluxDB must be restarted to use any changes to /etc/default/influxdb.

Log location on macOS

On macOs, InfluxDB stores logs at /usr/local/var/log/influxdb.log by default.

Using logrotate

You can use logrotate to rotate the log files generated by InfluxDB on systems where logs are written to flat files. If using the package install on a sysvinit system, the config file for logrotate is installed in /etc/logrotate.d. You can view the file here.

HTTP access logging

Use the HTTP access log to log HTTP request traffic separately from the other InfluxDB log output.

HTTP access log format

Find details about your GET and POST requests in the HTTP access log. Useful to help identify bad queries and improve performance. Refer to the table below for details included in the log.

The following examples show the HTTP access log format:

GET request format

[httpd], - - [21/Jul/2019:03:01:27 +0000] "GET /query?db=metrics&q=SELECT+MEAN%28value%29+as+average_cpu%2C+MAX%28value%29+as+peak_cpu+FROM+%22foo.load%22+WHERE+time+%3E%3D+now%28%29+-+1m+AND+org_id+%21%3D+%27%27+AND+group_id+%21%3D+%27%27+GROUP+BY+org_id%2Cgroup_id HTTP/1.0" 200 11450 "-" "Baz Service" d6ca5a13-at63-11o9-8942-000000000000 9337349

POST request format

[httpd] - - [19/Mar/2021:14:09:51 -0700] "POST /query?pretty=true HTTP/1.1 {'db': 'TestData', 'BadDataBase'}, {'q': 'SELECT * FROM a'}, {'p': '[REDACTED]'}" 200 1217 "-" "curl/7.68.0" 71dcf8eb-88f7-11eb-8003-002b67685b12 1300

Note: One or more password p values are replaced by a single [REDACTED].

HTTP access log

HTTP access logExample
Time of log event[21/Jul/2019:03:01:27 +0000]
Request methodGET or POST
HTTP API call being made*/query?db=metrics%26q=SELECT%20used_percent%20FROM%20%22telegraf.autogen.mem%22%20WHERE%20time%20%3E=%20now()%20-%201m%20
Request protocolHTTP/1.0
HTTP response code200
Size of response in bytes11450
User agentBaz Service
Request IDd4ca9a10-ab63-11e9-8942-000000000000
Response time in microseconds9357049
* This field shows the database being accessed and the query being run. For more details, see InfluxDB API reference. Note that this field is URL-encoded.

Redirecting HTTP access logging

When HTTP request logging is enabled, the HTTP logs are intermingled by default with internal InfluxDB logging. By redirecting the HTTP request log entries to a separate file, both log files are easier to read, monitor, and debug.

To redirect HTTP request logging:

Locate the [http] section of your InfluxDB configuration file and set the access-log-path option to specify the path where HTTP log entries should be written.


  • If influxd is unable to access the specified path, it will log an error and fall back to writing the request log to stderr.
  • The [httpd] prefix is stripped when HTTP request logging is redirected to a separate file, allowing access log parsing tools (like lnav) to render the files without additional modification.
  • To rotate the HTTP request log file, use the copytruncate method of logrotate or similar to leave the original file in place.

Structured logging

Structured logging enables machine-readable and more developer-friendly log output formats. The two structured log formats, logfmt and json, provide easier filtering and searching with external tools and simplifies integration of InfluxDB logs with Splunk, Papertrail, Elasticsearch, and other third party tools.

The InfluxDB logging configuration options (in the [logging] section) now include the following options:

  • format: auto (default) | logfmt | json
  • level: error | warn | info (default) | debug
  • suppress-logo: false (default) | true

For details on these logging configuration options and their corresponding environment variables, see Logging options in the configuration file documentation.

Logging formats

Three logging format options are available: auto, logfmt, and json. The default logging format setting, format = "auto", lets InfluxDB automatically manage the log encoding format:

  • When logging to a file, the logfmt is used
  • When logging to a terminal (or other TTY device), a user-friendly console format is used.

The json format is available when specified.

Examples of log output:


ts=2018-02-20T22:48:11.291815Z lvl=info msg="InfluxDB starting" version=unknown branch=unknown commit=unknown
ts=2018-02-20T22:48:11.291858Z lvl=info msg="Go runtime" version=go1.10 maxprocs=8
ts=2018-02-20T22:48:11.291875Z lvl=info msg="Loading configuration file" path=/Users/user_name/.influxdb/influxdb.conf


{"lvl":"info","ts":"2018-02-20T22:46:35Z","msg":"InfluxDB starting, version unknown, branch unknown, commit unknown"}
{"lvl":"info","ts":"2018-02-20T22:46:35Z","msg":"Go version go1.10, GOMAXPROCS set to 8"}
{"lvl":"info","ts":"2018-02-20T22:46:35Z","msg":"Using configuration at: /Users/user_name/.influxdb/influxdb.conf"}


2018-02-20T22:55:34.246997Z     info    InfluxDB starting       {"version": "unknown", "branch": "unknown", "commit": "unknown"}
2018-02-20T22:55:34.247042Z     info    Go runtime      {"version": "go1.10", "maxprocs": 8}
2018-02-20T22:55:34.247059Z     info    Loading configuration file      {"path": "/Users/user_name/.influxdb/influxdb.conf"}

Logging levels

The level option sets the log level to be emitted. Valid logging level settings are error, warn, info(default), and debug. Logs that are equal to, or above, the specified level will be emitted.

Logo suppression

The suppress-logo option can be used to suppress the logo output that is printed when the program is started. The logo is always suppressed if STDOUT is not a TTY.


Logging has been enhanced to provide tracing of important InfluxDB operations. Tracing is useful for error reporting and discovering performance bottlenecks.

Logging keys used in tracing

Tracing identifier key

The trace_id key specifies a unique identifier for a specific instance of a trace. You can use this key to filter and correlate all related log entries for an operation.

All operation traces include consistent starting and ending log entries, with the same message (msg) describing the operation (e.g., “TSM compaction”), but adding the appropriate op_event context (either start or end). For an example, see Finding all trace log entries for an InfluxDB operation.

Example: trace_id=06R0P94G000

Operation keys

The following operation keys identify an operation’s name, the start and end timestamps, and the elapsed execution time.


Unique identifier for an operation. You can filter on all operations of a specific name.

Example: op_name=tsm1_compact_group


Specifies the start and end of an event. The two possible values, (start) or (end), are used to indicate when an operation started or ended. For example, you can grep by values in op_name AND op_event to find all starting operation log entries. For an example of this, see Finding all starting log entries.

Example: op_event=start


Amount of time the operation spent executing. Logged with the ending trace log entry. Time unit displayed depends on how much time has elapsed – if it was seconds, it will be suffixed with s. Valid time units are ns, µs, ms, and s.

Example: op_elapsed=0.352ms

Log identifier context key

The log identifier key (log_id) lets you easily identify every log entry for a single execution of an influxd process. There are other ways a log file could be split by a single execution, but the consistent log_id eases the searching of log aggregation services.

Example: log_id=06QknqtW000

Database context keys

db_instance: Database name

db_rp: Retention policy name

db_shard_id: Shard identifier

db_shard_group Shard group identifier


Here are a couple of popular tools available for processing and filtering log files output in logfmt or json formats.


The hutils, provided by Heroku, is a collection of command line utilities for working with logs with logfmt encoding, including:

  • lcut: Extracts values from a logfmt trace based on a specified field name.
  • lfmt: Prettifies logfmt lines as they emerge from a stream, and highlights their key sections.
  • ltap: Accesses messages from log providers in a consistent way to allow easy parsing by other utilities that operate on logfmt traces.
  • lviz: Visualizes logfmt output by building a tree out of a dataset combining common sets of key-value pairs into shared parent nodes.

The lnav (Log File Navigator) is an advanced log file viewer useful for watching and analyzing your log files from a terminal. The lnav viewer provides a single log view, automatic log format detection, filtering, timeline view, pretty-print view, and querying logs using SQL.


The following operations, listed by their operation name (op_name) are traced in InfluxDB internal logs and available for use without changes in logging level.

Initial opening of data files

The tsdb_open operation traces include all events related to the initial opening of the tsdb_store.

Retention policy shard deletions

The retention.delete_check operation includes all shard deletions related to the retention policy.

TSM snapshotting in-memory cache to disk

The tsm1_cache_snapshot operation represents the snapshotting of the TSM in-memory cache to disk.

TSM compaction strategies

The tsm1_compact_group operation includes all trace log entries related to TSM compaction strategies and displays the related TSM compaction strategy keys:

  • tsm1_strategy: level | full
  • tsm1_level: 1 | 2 | 3
  • tsm1_optimize: true | false

Series file compactions

The series_partition_compaction operation includes all trace log entries related to series file compactions.

Continuous query execution (if logging enabled)

The continuous_querier_execute operation includes all continuous query executions, if logging is enabled.

TSI log file compaction

The tsi1_compact_log_file

TSI level compaction

The tsi1_compact_to_level operation includes all trace log entries for TSI level compactions.

Tracing examples

Finding all trace log entries for an InfluxDB operation

In the example below, you can see the log entries for all trace operations related to a “TSM compaction” process. Note that the initial entry shows the message “TSM compaction (start)” and the final entry displays the message “TSM compaction (end)”. [Note: Log entries were grepped using the trace_id value and then the specified key values were displayed using lcut (an hutils tool).]

$ grep "06QW92x0000" influxd.log | lcut ts lvl msg strategy level
2018-02-21T20:18:56.880065Z	info	TSM compaction (start)	full
2018-02-21T20:18:56.880162Z	info	Beginning compaction	full
2018-02-21T20:18:56.880185Z	info	Compacting file	full
2018-02-21T20:18:56.880211Z	info	Compacting file	full
2018-02-21T20:18:56.880226Z	info	Compacting file	full
2018-02-21T20:18:56.880254Z	info	Compacting file	full
2018-02-21T20:19:03.928640Z	info	Compacted file	full
2018-02-21T20:19:03.928687Z	info	Finished compacting files	full
2018-02-21T20:19:03.928707Z	info	TSM compaction (end)	full

Finding all starting operation log entries

To find all starting operation log entries, you can grep by values in op_name AND op_event. In the following example, the grep returned 101 entries, so the result below only displays the first entry. In the example result entry, the timestamp, level, strategy, trace_id, op_name, and op_event values are included.

$ grep -F 'op_name=tsm1_compact_group' influxd.log | grep -F 'op_event=start'
ts=2018-02-21T20:16:16.709953Z lvl=info msg="TSM compaction" log_id=06QVNNCG000 engine=tsm1 level=1 strategy=level trace_id=06QV~HHG000 op_name=tsm1_compact_group op_event=start

Using the lcut utility (in hutils), the following command uses the previous grep command, but adds an lcut command to only display the keys and their values for keys that are not identical in all of the entries. The following example includes 19 examples of unique log entries displaying selected keys: ts, strategy, level, and trace_id.

$ grep -F 'op_name=tsm1_compact_group' influxd.log | grep -F 'op_event=start' | lcut ts strategy level trace_id | sort -u
2018-02-21T20:16:16.709953Z	level	1	06QV~HHG000
2018-02-21T20:16:40.707452Z	level	1	06QW0k0l000
2018-02-21T20:17:04.711519Z	level	1	06QW2Cml000
2018-02-21T20:17:05.708227Z	level	2	06QW2Gg0000
2018-02-21T20:17:29.707245Z	level	1	06QW3jQl000
2018-02-21T20:17:53.711948Z	level	1	06QW5CBl000
2018-02-21T20:18:17.711688Z	level	1	06QW6ewl000
2018-02-21T20:18:56.880065Z	full		06QW92x0000
2018-02-21T20:20:46.202368Z	level	3	06QWFizW000
2018-02-21T20:21:25.292557Z	level	1	06QWI6g0000
2018-02-21T20:21:49.294272Z	level	1	06QWJ_RW000
2018-02-21T20:22:13.292489Z	level	1	06QWL2B0000
2018-02-21T20:22:37.292431Z	level	1	06QWMVw0000
2018-02-21T20:22:38.293320Z	level	2	06QWMZqG000
2018-02-21T20:23:01.293690Z	level	1	06QWNygG000
2018-02-21T20:23:25.292956Z	level	1	06QWPRR0000
2018-02-21T20:24:33.291664Z	full		06QWTa2l000
2018-02-21T21:12:08.017055Z	full		06QZBpKG000
2018-02-21T21:12:08.478200Z	full		06QZBr7W000

Was this page helpful?

Thank you for your feedback!

The future of Flux

Flux is going into maintenance mode. You can continue using it as you currently are without any changes to your code.

Read more