Migrate data from InfluxDB Cloud to InfluxDB Cloud Dedicated

To migrate data from InfluxDB Cloud (TSM) to an InfluxDB Cloud Dedicated powered by the v3 storage engine, query the data from your TSM-powered buckets in time-based batches and write the queried data to a database in your InfluxDB Cloud Dedicated cluster. Because full data migrations will likely exceed your InfluxDB Cloud organizations' limits and adjustable quotas, migrate your data in batches.

The following guide provides instructions for setting up an InfluxDB task that queries data from an InfluxDB Cloud TSM-powered bucket in time-based batches and writes each batch to an InfluxDB Cloud Dedicated (InfluxDB v3) database in another organization.

• Before you migrate
• Set up the migration
• Migration task
  • Configure the migration
  • Migration Flux script
  • Configuration help
• Troubleshoot migration task failures

Before you migrate

Before you migrate from InfluxDB Cloud (TSM) to InfluxDB Cloud Dedicated, there are schema design practices supported by the TSM storage engine that are not supported in the InfluxDB v3 storage engine. Specifically, InfluxDB v3 enforces the following schema restrictions:

• You can’t use duplicate names for tags and fields
• By default, measurements can contain up to 250 columns where each column represents time, a field, or a tag.

For more information, see Schema restrictions.

If your schema does not adhere to these restrictions, you must update your schema before migrating to InfluxDB Cloud Dedicated.

// ...

// Query all data from the specified source bucket within the batch-defined time
// range. To limit migrated data by measurement, tag, or field, add a `filter()`
// function after `range()` with the appropriate predicate fn.
data = () =>
    from(bucket: migration.sourceBucket)
        |> range(start: batch.start, stop: batch.stop)
        |> rename(columns: {temp: "tempScale", state: "stateTag"})

// ...

// ...

groupFieldsIntoMeasurements = (tables=<-) => {
    group1 = 
        tables
            |> filter(fn: (r) =>
                r._field == "example-field-1"
                or r._field == "example-field-2"
                or r._field == "example-field-3"
                or r._field == "example-field-4"
                or r._field == "example-field-5"
            )
            |> set(key: "_measurement", value: "example-measurement-1" )
    group2 = 
        tables
            |> filter(fn: (r) =>
                r._field == "example-field-6"
                or r._field == "example-field-7"
                or r._field == "example-field-8"
                or r._field == "example-field-9"
                or r._field == "example-field-10"
            )
            |> set(key: "_measurement", value: "example-measurement-2" )
    group3 = 
        tables
            |> filter(fn: (r) =>
                r._field == "example-field-11"
                or r._field == "example-field-12"
                or r._field == "example-field-13"
                or r._field == "example-field-14"
                or r._field == "example-field-15"
            )
            |> set(key: "_measurement", value: "example-measurement-3" )
    
    return union(tables: [group1, group2, group3])
}

// Query all data from the specified source bucket within the batch-defined time
// range. To limit migrated data by measurement, tag, or field, add a `filter()`
// function after `range()` with the appropriate predicate fn.
data = () =>
    from(bucket: migration.sourceBucket)
        |> range(start: batch.start, stop: batch.stop)
        |> groupFieldsIntoMeasurements()

// ...

Set up the migration

1. In the InfluxDB Cloud Dedicated cluster you’re migrating data to:

   1. Create a database to migrate data to.
   2. Create a database token with write access to the database you want to migrate to.

2. In the InfluxDB Cloud (TSM) organization you’re migrating data from:

   1. Add the InfluxDB Cloud Dedicated token (created in step 1b)_ as a secret using the key, INFLUXDB_DEDICATED_TOKEN. See Add secrets for more information.

   2. Create a bucket to store temporary migration metadata.

   3. Create a task using the provided migration task. Update the necessary migration configuration options.

   4. (Optional) Set up migration monitoring.

   5. Save the task.

      Newly-created tasks are enabled by default, so the data migration begins when you save the task.

After the migration is complete, each subsequent migration task execution will fail with the following error:

error exhausting result iterator: error calling function "die" @41:9-41:86:
Batch range is beyond the migration range. Migration is complete.

Migration task

Configure the migration

1. Specify how often you want the task to run using the task.every option. See Determine your task interval.

2. Define the following properties in the migration record:

   migration

   • start: Earliest time to include in the migration. See Determine your migration start time.
   • stop: Latest time to include in the migration.
   • batchInterval: Duration of each time-based batch. See Determine your batch interval.
   • batchBucket: InfluxDB Cloud (TSM) bucket to store migration batch metadata in.
   • sourceBucket: InfluxDB Cloud (TSM) bucket to migrate data from.
   • destinationHost: InfluxDB Cloud Dedicated cluster URL to migrate data to.
   • destinationOrg: Provide an empty string (ignored by InfluxDB Cloud Dedicated).
   • destinationToken: InfluxDB Cloud Dedicated token. To keep the API token secure, store it as a secret in InfluxDB Cloud (TSM).
   • destinationDatabase: InfluxDB Cloud Dedicated database to migrate data to.

Migration Flux script

import "array"
import "experimental"
import "date"
import "influxdata/influxdb/secrets"

// Configure the task
option task = {every: 5m, name: "Migrate data from TSM to v3"}

// Configure the migration
migration = {
    start: 2023-01-01T00:00:00Z,
    stop: 2023-02-01T00:00:00Z,
    batchInterval: 1h,
    batchBucket: "migration",
    sourceBucket: "example-cloud-bucket",
    destinationHost: "https://cluster-id.a.influxdb.io",
    destinationOrg: "",
    destinationToken: secrets.get(key: "INFLUXDB_DEDICATED_TOKEN"),
    destinationDatabase: "example-destination-database",
}

// batchRange dynamically returns a record with start and stop properties for
// the current batch. It queries migration metadata stored in the
// `migration.batchBucket` to determine the stop time of the previous batch.
// It uses the previous stop time as the new start time for the current batch
// and adds the `migration.batchInterval` to determine the current batch stop time.
batchRange = () => {
    _lastBatchStop =
        (from(bucket: migration.batchBucket)
            |> range(start: migration.start)
            |> filter(fn: (r) => r._field == "batch_stop")
            |> filter(fn: (r) => r.dstOrg == migration.destinationOrg)
            |> filter(fn: (r) => r.dstBucket == migration.destinationDatabase)
            |> last()
            |> findRecord(fn: (key) => true, idx: 0))._value
    _batchStart =
        if exists _lastBatchStop then
            time(v: _lastBatchStop)
        else
            migration.start

    return {start: _batchStart, stop: date.add(d: migration.batchInterval, to: _batchStart)}
}

// Define a static record with batch start and stop time properties
batch = batchRange()

// Check to see if the current batch start time is beyond the migration.stop
// time and exit with an error if it is.
finished =
    if batch.start >= migration.stop then
        die(msg: "Batch range is beyond the migration range. Migration is complete.")
    else
        "Migration in progress"

// Query all data from the specified source bucket within the batch-defined time
// range. To limit migrated data by measurement, tag, or field, add a `filter()`
// function after `range()` with the appropriate predicate fn.
data = () =>
    from(bucket: migration.sourceBucket)
        |> range(start: batch.start, stop: batch.stop)

// rowCount is a stream of tables that contains the number of rows returned in
// the batch and is used to generate batch metadata.
rowCount =
    data()
        |> count()
        |> group(columns: ["_start", "_stop"])
        |> sum()

// emptyRange is a stream of tables that acts as filler data if the batch is
// empty. This is used to generate batch metadata for empty batches and is
// necessary to correctly increment the time range for the next batch.
emptyRange = array.from(rows: [{_start: batch.start, _stop: batch.stop, _value: 0}])

// metadata returns a stream of tables representing batch metadata.
metadata = () => {
    _input =
        if exists (rowCount |> findRecord(fn: (key) => true, idx: 0))._value then
            rowCount
        else
            emptyRange

    return
        _input
            |> map(
                fn: (r) =>
                    ({
                        _time: now(),
                        _measurement: "batches",
                        srcBucket: migration.sourceBucket,
                        dstOrg: migration.destinationOrg,
                        dstBucket: migration.destinationDatabase,
                        batch_start: string(v: batch.start),
                        batch_stop: string(v: batch.stop),
                        rows: r._value,
                        percent_complete:
                            float(v: int(v: r._stop) - int(v: migration.start)) / float(
                                    v: int(v: migration.stop) - int(v: migration.start),
                                ) * 100.0,
                    }),
            )
            |> group(columns: ["_measurement", "dstOrg", "srcBucket", "dstBucket"])
}

// Write the queried data to the specified InfluxDB OSS bucket.
data()
    |> to(
        host: migration.destinationHost,
        org: migration.destinationOrg,
        token: migration.destinationToken,
        bucket: migration.destinationDatabase
    )

// Generate and store batch metadata in the migration.batchBucket.
metadata()
    |> experimental.to(bucket: migration.batchBucket)

Configuration help

from(bucket: "example-cloud-bucket")
    |> range(start: 0)
    |> group()
    |> first()
    |> keep(columns: ["_time"])

INFLUXDB_CLOUD_ORG=<your_influxdb_cloud_org>
INFLUXDB_CLOUD_TOKEN=<your_influxdb_cloud_token>
INFLUXDB_CLOUD_BUCKET=<your_influxdb_cloud_bucket>

curl -so /dev/null --request POST \
  https://cluster-id.a.influxdb.io/api/v2/query?org=$INFLUXDB_CLOUD_ORG  \
  --header "Authorization: Token $INFLUXDB_CLOUD_TOKEN" \
  --header "Accept: application/csv" \
  --header "Content-type: application/vnd.flux" \
  --data "from(bucket:\"$INFLUXDB_CLOUD_BUCKET\") |> range(start: -1d, stop: now())" \
  --write-out '%{size_download}'

batchInterval = (write-rate-limit-mb / response-body-size-mb) * range-duration

batchInterval = (5 / 1) * 1d
// batchInterval = 5d

Troubleshoot migration task failures

If the migration task fails, view your task logs to identify the specific error. Below are common causes of migration task failures.

• Exceeded rate limits
• Invalid API token
• Query timeout
• Batch size is too large

Exceeded rate limits

If your data migration causes you to exceed your InfluxDB Cloud organization’s limits and quotas, the task will return an error similar to:

too many requests

Possible solutions:

• Update the migration.batchInterval setting in your migration task to use a smaller interval. Each batch will then query less data.

Invalid API token

If the API token you add as the INFLUXDB_DEDICATED_TOKEN doesn’t have write access to your InfluxDB Cloud Dedicated database, the task will return an error similar to:

unauthorized access

Possible solutions:

• Ensure the API token has write access to your InfluxDB Cloud Dedicated database.
• Generate a new InfluxDB Cloud Dedicated token with write access to the database you want to migrate to. Then, update the INFLUXDB_DEDICATED_TOKEN secret in your InfluxDB Cloud (TSM) instance with the new token.

Query timeout

The InfluxDB Cloud query timeout is 90 seconds. If it takes longer than this to return the data from the batch interval, the query will time out and the task will fail.

Possible solutions:

• Update the migration.batchInterval setting in your migration task to use a smaller interval. Each batch will then query less data and take less time to return results.

Batch size is too large

If your batch size is too large, the task returns an error similar to the following:

internal error: error calling function "metadata" @97:1-97:11: error calling function "findRecord" @67:32-67:69: wrong number of fields

Possible solutions:

• Update the migration.batchInterval setting in your migration task to use a smaller interval and retrieve less data per batch.