Upgrade to Kapacitor v1
Contents
- Overview
- Stopping the Kapacitor service
- Backup configuration and data
- Debian package upgrade
- RPM package upgrade
- Upgrade with .zip or .tar.gz
- Verifying the restart
Overview
How Kapacitor was installed will determine how Kapacitor should be upgraded.
The application may have been installed directly using the package management mechanisms of the OS or it may have been installed by unpackging the .zip or .tar.gz distributions. This document will cover upgrading Kapacitor from release 1.3.1 to release 1.6 on Linux(Ubuntu 16.04 and CentOS 7.3). This document presents some specifics of upgrading using the .deb package; some similar specifics of upgrading using the .rpm package; and then more generally upgrading using the .tar.gz binary distribution. The binary package upgrade should serve as an example offering hints as to how to upgrade using the binary distributions on other operating systems, for example on Windows using the .zip file. On other operating systems the general steps presented here will be roughly the same.
Before proceeding with the Kapacitor upgrade please ensure that InfluxDB and Telegraf (if used) have been upgraded to a release compatible with the latest release of Kapacitor. In this example we will use:
- InfluxDB 1.5.2
- Telegraf 1.6
- Kapacitor 1.6
For instructions on upgrading InfluxDB, please see the InfluxDB upgrade documentation.
For information about what is new in the latest Kapacitor release, view the Changelog.
In general the steps for upgrading Kapacitor are as follows:
Download a copy of the latest Kapacitor install package or binary distribution from the Influxdata download site.
Important note - When upgrading Kapacitor, simply download the package using
wget. Do not proceed directly with the installation/upgrade until the following instructions and recommendations have been understood and put to use.Stop the running Kapacitor service.
Backup the configuration file (e.g.
/etc/kapacitor/kapacitor.conf- n.b. the default location).(Optional) Back up a copy of the contents of the Kapacitor data directory (e.g
/var/lib/kapacitor/*- n.b. the default location).Perform the upgrade.
If during the upgrade the current configuration was not preserved, manually migrate the values in the backup configuration file to the new one.
Restart the Kapacitor service.
Verify the restart in the log files and by testing existing tasks.
Stopping the Kapacitor service
No matter how Kapacitor was installed, it is assumed that Kapacitor is configured to run as a service using systemd.
Through systemctl check to see if the Kapacitor service is running .
$ sudo systemctl status kapacitor.service
● kapacitor.service - Time series data processing engine.
Loaded: loaded (/lib/systemd/system/kapacitor.service; enabled; vendor preset: enabled)
Active: inactive (dead) since Po 2017-08-21 14:06:18 CEST; 2s ago
Docs: https://github.com/influxdb/kapacitor
Process: 27741 ExecStart=/usr/bin/kapacitord -config /etc/kapacitor/kapacitor.conf $KAPACITOR_OPTS (code=exited, status=0/SUCCESS)
Main PID: 27741 (code=exited, status=0/SUCCESS)
The value for the Active field shown above should be set to ‘inactive’.
If instead this value happens to be active(running), the service can be stopped using systemctl.
Example - Stopping the service
sudo systemctl stop kapacitor.service
Backup configuration and data
Whenever upgrading, no matter the upgrade approach, it can pay to be a bit paranoid and to backup essential files and data. The Kapacitor configuration file, located at /etc/kapacitor/kapacitor.conf by default, is most important when upgrading Kapacitor. In addition, you may want to backup your Kapacitor database, replays, and id files in /var/lib/kapacitor.
Debian package upgrade
Check to see if Kapacitor was installed as a Debian package.
$ dpkg --list | grep "kapacitor"
ii kapacitor 1.3.1-1 amd64 Time series data processing engine
If the line ii kapacitor... is returned, it is safe to continue the upgrade using the Debian package and the instructions in this section. If nothing is returned, please consult the Upgrade with .zip or .tar.gz section below for a general example on how to proceed.
Package upgrade
Kapacitor can now be upgraded using the Debian package manager:
Example - upgrade with dpkg
$ sudo dpkg -i kapacitor_1.7.3_amd64.deb
(Reading database ... 283418 files and directories currently installed.)
Preparing to unpack kapacitor_1.7.3_amd64.deb ...
Unpacking kapacitor (1.7.3-1) over (1.3.1-1) ...
Removed symlink /etc/systemd/system/kapacitor.service.
Removed symlink /etc/systemd/system/multi-user.target.wants/kapacitor.service.
Setting up kapacitor (1.7.3-1) ...
During the upgrade the package manager will detect any differences between the current configuration file and the new configuration file included in the installation package. The package manager prompts the user to choose how to deal with this conflict. The default behavior is to preserve the existing configuration file. This is generally the safest choice, but it can mean losing visibility of new features provided in the more recent release.
Example - Prompt on configuration file conflict
Configuration file '/etc/kapacitor/kapacitor.conf'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** kapacitor.conf (Y/I/N/O/D/Z) [default=N] ?
Migrate configuration file values
If during the upgrade the configuration file was overwritten, open the new configuration file in an editor such as nano or vim and from the backup copy of the old configuration file update the values of all changed keys - for example the InfluxDB fields for username, password, urls and the paths to ssl-cert and ssl-key. Depending on the installation, there will most likely be more than just these.
Restart Kapacitor
Restart is best handled through systemctl.
sudo systemctl restart kapacitor.service
Note that restart is used here instead of start, in the event that Kapacitor was not shutdown properly.
For tips on verifying the restart, see the Verifying the Restart section below.
RPM package upgrade
Check to see if Kapacitor was installed as an RPM package.
Example - checking for Kapacitor installation
# yum list installed kapacitor
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: ftp.sh.cvut.cz
* extras: ftp.fi.muni.cz
* updates: ftp.sh.cvut.cz
Installed Packages
kapacitor.x86_64 1.7.3-1 installed
If the line kapacitor.x86_64...1.7.3-1...installed is returned, it is safe to continue the upgrade using the RPM package and the instructions in this section. If instead the message Error: No matching Packages to list was returned please consult the Upgrade with .zip or .tar.gz section below for a general example on how to proceed.
Package upgrade
Please note that the following example commands are run as user root. To use them directly please log in as the root user or append sudo to them.
Kapacitor can now be upgraded using yum localupdate from the directory into which the installation packages were downloaded:
Example - yum localupdate
# yum -y localupdate kapacitor-1.7.3.x86_64.rpm
Loaded plugins: fastestmirror
Examining kapacitor-1.7.3.x86_64.rpm: kapacitor-1.3.1-1.x86_64
Marking kapacitor-1.7.3.x86_64.rpm as an update to kapacitor-1.3.1-1.x86_64
Resolving Dependencies
--> Running transaction check
---> Package kapacitor.x86_64 0:1.3.1-1 will be updated
---> Package kapacitor.x86_64 0:1.7.3-1 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================================
Package Arch Version Repository Size
=============================================================================================================================================================
Updating:
kapacitor x86_64 1.7.3-1 /kapacitor-1.7.3.x86_64 90 M
Transaction Summary
=============================================================================================================================================================
Upgrade 1 Package
Total size: 90 M
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Updating : kapacitor-1.7.3-1.x86_64 1/2
warning: /etc/kapacitor/kapacitor.conf created as /etc/kapacitor/kapacitor.conf.rpmnew
Failed to execute operation: Too many levels of symbolic links
warning: %post(kapacitor-1.7.3-1.x86_64) scriptlet failed, exit status 1
Non-fatal POSTIN scriptlet failure in rpm package kapacitor-1.7.3-1.x86_64
Cleanup : kapacitor-1.3.1-1.x86_64 2/2
Removed symlink /etc/systemd/system/multi-user.target.wants/kapacitor.service.
Removed symlink /etc/systemd/system/kapacitor.service.
Created symlink from /etc/systemd/system/kapacitor.service to /usr/lib/systemd/system/kapacitor.service.
Created symlink from /etc/systemd/system/multi-user.target.wants/kapacitor.service to /usr/lib/systemd/system/kapacitor.service.
Verifying : kapacitor-1.7.3-1.x86_64 1/2
Verifying : kapacitor-1.3.1-1.x86_64 2/2
Updated:
kapacitor.x86_64 0:1.7.3-1
Complete!
If after running yum localupdate the console messages are the same as above, it is safe to continue with managing the configuration files.
Migrate configuration file values
In the example from the previous section a warning concerning the kapacitor.conf file may have been observed. The original configuration file has been preserved and the new configuration file has been created with the extension .rpmnew. To use the new configuration file rename the current configuration file kapacitor.conf.121 and the new configuration file kapacitor.conf. Using vim or nano manually migrate the old values from kapacitor.conf.121 or from a backup copy into the new copy of kapacitor.conf.
Restart Kapacitor
Restart is best handled through systemctl.
systemctl restart kapacitor.service
Note that restart is used here instead of start, in the event that Kapacitor was not shutdown properly.
For tips on verifying the restart see the Verifying the Restart section below.
Upgrade with .zip or .tar.gz
How Kapacitor has been installed using the binary distribution (.zip, .tgz) is open to a certain number of variables depending on the specific OS, organizational preferences and other factors. The package contents may have been simply unpacked in a /home/<user> directory. They may have been copied into the system directories suggested by the package file structure. Or they may have been leveraged using another file system strategy. The following discussion presents one hypothetical installation. The steps are presentational and should, with a little bit of creative thinking, be adaptable to other types of installation.
A hypothetical installation
The following presentation will use a hypothetical installation, where all Influxdata products have been unpacked and are running from the directory /opt/influxdata. Please note that it is recommended that Influxdata products should be installed using the system specific install packages (e.g. .deb, .rpm) whenever possible, however on other systems, for which there is no current installation package, the binary distribution (.zip, .tar.gz) can be used.
Example - the Influxdata directory
$ ls -l /opt/influxdata/
total 20
lrwxrwxrwx 1 influxdb influxdb 33 srp 22 12:51 influxdb -> /opt/influxdata/influxdb-1.3.1-1/
drwxr-xr-x 5 influxdb influxdb 4096 kvě 8 22:16 influxdb-1.3.1-1
lrwxrwxrwx 1 kapacitor kapacitor 34 srp 22 12:52 kapacitor -> /opt/influxdata/kapacitor-1.7.3-1/
drwxr-xr-x 6 kapacitor kapacitor 4096 srp 22 10:56 kapacitor-1.7.3-1
drwxr-xr-x 2 influxdb influxdb 4096 srp 22 13:52 ssl
drwxrwxr-x 5 telegraf telegraf 4096 úno 1 2017 telegraf
In the above example it can be seen that for the InfluxDB server and the Kapacitor application a generic directory has been created using a symbolic link to the directory for the specific product release.
Elsewhere in the file system, configuration and lib directories have been pointed into these locations using additional symbolic links.
Example - symbolic links from /etc
...
$ ls -l `find /etc -maxdepth 1 -type l -print`
lrwxrwxrwx 1 root root 38 srp 22 12:56 /etc/influxdb -> /opt/influxdata/influxdb/etc/influxdb/
lrwxrwxrwx 1 root root 40 srp 22 12:57 /etc/kapacitor -> /opt/influxdata/kapacitor/etc/kapacitor/
lrwxrwxrwx 1 root root 38 srp 22 12:57 /etc/telegraf -> /opt/influxdata/telegraf/etc/telegraf/
...
Example - symbolic links from /usr/lib
$ ls -l `find /usr/lib -maxdepth 1 -type l -print`
lrwxrwxrwx 1 root root 42 srp 22 13:31 /usr/lib/influxdb -> /opt/influxdata/influxdb/usr/lib/influxdb/
lrwxrwxrwx 1 root root 44 srp 22 13:33 /usr/lib/kapacitor -> /opt/influxdata/kapacitor/usr/lib/kapacitor/
...
lrwxrwxrwx 1 root root 42 srp 22 13:32 /usr/lib/telegraf -> /opt/influxdata/telegraf/usr/lib/telegraf/
Example - symbolic links from /usr/bin
ls -l `find /usr/bin -maxdepth 1 -type l -print`
...
lrwxrwxrwx 1 root root 39 srp 22 14:40 /usr/bin/influx -> /opt/influxdata/influxdb/usr/bin/influx
lrwxrwxrwx 1 root root 40 srp 22 14:40 /usr/bin/influxd -> /opt/influxdata/influxdb/usr/bin/influxd
...
lrwxrwxrwx 1 root root 43 srp 22 14:04 /usr/bin/kapacitor -> /opt/influxdata/kapacitor/usr/bin/kapacitor
lrwxrwxrwx 1 root root 44 srp 22 14:04 /usr/bin/kapacitord -> /opt/influxdata/kapacitor/usr/bin/kapacitord
...
lrwxrwxrwx 1 root root 41 srp 22 13:57 /usr/bin/telegraf -> /opt/influxdata/telegraf/usr/bin/telegraf
...
Data file directories have been setup by hand.
Example - /var/lib directory
$ ls -l /var/lib/ | sort -k3,3
total 284
...
drwxr-xr-x 5 influxdb influxdb 4096 srp 22 14:12 influxdb
drwxr-xr-x 3 kapacitor kapacitor 4096 srp 22 14:16 kapacitor
...
InfluxDB is configured to use HTTPS and authentication. InfluxDB, Telegraf and Kapacitor have been configured to start and stop with Systemd.
Example - symbolic links in the systemd directory
$ ls -l `find /etc/systemd/system -maxdepth 1 -type l -print`
...
lrwxrwxrwx 1 root root 42 srp 22 13:39 /etc/systemd/system/influxdb.service -> /usr/lib/influxdb/scripts/influxdb.service
lrwxrwxrwx 1 root root 44 srp 22 13:40 /etc/systemd/system/kapacitor.service -> /usr/lib/kapacitor/scripts/kapacitor.service
lrwxrwxrwx 1 root root 42 srp 22 13:39 /etc/systemd/system/telegraf.service -> /usr/lib/telegraf/scripts/telegraf.service
...
Manual upgrade
Ensure that InfluxDB and Telegraf (if installed) have been upgraded, that the Kapacitor service has been stopped and that a backup copy of kapacitor.conf has been saved.
Here the latest InfluxDB distribution has been unpacked alongside the previous distribution and the general symbolic link has been updated. The Telegraf distribution has been unpacked on top of the previous one.
Example - the Influxdata directory post InfluxDB and Telegraf upgrade
$ ls -l /opt/influxdata/
total 24
drwxr-xr-x 2 root root 4096 srp 22 15:21 bak
lrwxrwxrwx 1 root root 17 srp 22 15:15 influxdb -> influxdb-1.5.2-1/
drwxr-xr-x 5 influxdb influxdb 4096 kvě 8 22:16 influxdb-1.2.4-1
drwxr-xr-x 5 influxdb influxdb 4096 srp 5 01:33 influxdb-1.5.2-1
lrwxrwxrwx 1 kapacitor kapacitor 34 srp 22 12:52 kapacitor -> /opt/influxdata/kapacitor-1.7.3-1/
drwxr-xr-x 6 kapacitor kapacitor 4096 srp 22 10:56 kapacitor-1.7.3-1
drwxr-xr-x 2 influxdb influxdb 4096 srp 22 13:52 ssl
drwxr-xr-x 5 telegraf telegraf 4096 čec 27 01:26 telegraf
Kapacitor is upgraded using the same approach as the InfluxDB upgrade. The new distribution package is unpacked alongside of the current one.
Example - unpacking the latest Kapacitor distribution
$ cd /opt/influxdata
$ sudo tar -xvzf /home/karl/Downloads/install/kapacitor-1.3.1_linux_amd64.tar.gz
./kapacitor-1.7.3-1/
./kapacitor-1.7.3-1/usr/
./kapacitor-1.7.3-1/usr/bin/
./kapacitor-1.7.3-1/usr/bin/kapacitord
./kapacitor-1.7.3-1/usr/bin/kapacitor
./kapacitor-1.7.3-1/usr/bin/tickfmt
./kapacitor-1.7.3-1/usr/lib/
./kapacitor-1.7.3-1/usr/lib/kapacitor/
./kapacitor-1.7.3-1/usr/lib/kapacitor/scripts/
./kapacitor-1.7.3-1/usr/lib/kapacitor/scripts/init.sh
./kapacitor-1.7.3-1/usr/lib/kapacitor/scripts/kapacitor.service
./kapacitor-1.7.3-1/usr/share/
./kapacitor-1.7.3-1/usr/share/bash-completion/
./kapacitor-1.7.3-1/usr/share/bash-completion/completions/
./kapacitor-1.7.3-1/usr/share/bash-completion/completions/kapacitor
./kapacitor-1.7.3-1/var/
./kapacitor-1.7.3-1/var/log/
./kapacitor-1.7.3-1/var/log/kapacitor/
./kapacitor-1.7.3-1/var/lib/
./kapacitor-1.7.3-1/var/lib/kapacitor/
./kapacitor-1.7.3-1/etc/
./kapacitor-1.7.3-1/etc/kapacitor/
./kapacitor-1.7.3-1/etc/kapacitor/kapacitor.conf
./kapacitor-1.7.3-1/etc/logrotate.d/
./kapacitor-1.7.3-1/etc/logrotate.d/kapacitor
Following extraction the old symbolic link is removed and a new one is created to the new distribution. This approach is similar to simply unpacking or copying the distribution contents over the existing directories, which is also a feasible approach. Parallel unpacking and link creation offers the advantage of preserving the previous installation, albeit in a now inactive place. This approach facilitates reverting back to the previous installation, if for some reason that will be desired.
Example - Post extraction commands
$ sudo chown -R kapacitor:kapacitor kapacitor-1.7.3-1/
$ sudo rm kapacitor
$ sudo ln -s ./kapacitor-1.7.3-1/ ./kapacitor
$ sudo chown kapacitor:kapacitor kapacitor
$ ls -l
total 28
drwxr-xr-x 2 root root 4096 srp 22 15:21 bak
lrwxrwxrwx 1 root root 17 srp 22 15:15 influxdb -> influxdb-1.5.2-1/
drwxr-xr-x 5 influxdb influxdb 4096 kvě 8 22:16 influxdb-1.2.4-1
drwxr-xr-x 5 influxdb influxdb 4096 srp 5 01:33 influxdb-1.5.2-1
lrwxrwxrwx 1 kapacitor kapacitor 20 srp 22 15:35 kapacitor -> ./kapacitor-1.7.3-1/
drwxr-xr-x 6 kapacitor kapacitor 4096 srp 22 10:56 kapacitor-1.7.3-1
drwxr-xr-x 5 kapacitor kapacitor 4096 čen 2 20:22 kapacitor-1.7.3-1
drwxr-xr-x 2 influxdb influxdb 4096 srp 22 13:52 ssl
drwxr-xr-x 5 telegraf telegraf 4096 čec 27 01:26 telegraf
Migrate configuration file values
Using vim the values from the backup of the previous configuration file are manually migrated to the new one.
$ sudo -u kapacitor vim kapacitor/etc/kapacitor/kapacitor.conf
Restart Kapacitor
Restart is handled through systemctl.
sudo systemctl restart kapacitor.service
Note that restart is used here instead of start, in the event that Kapacitor was not shutdown properly.
Verifying the restart
First check the service status in systemctl.
Example - service status check
$ sudo systemctl status kapacitor.service
● kapacitor.service - Time series data processing engine.
Loaded: loaded (/lib/systemd/system/kapacitor.service; enabled; vendor preset: enabled)
Active: active (running) since Po 2017-08-21 14:22:18 CEST; 16min ago
Docs: https://github.com/influxdb/kapacitor
Main PID: 29452 (kapacitord)
Tasks: 13
Memory: 11.6M
CPU: 726ms
CGroup: /system.slice/kapacitor.service
└─29452 /usr/bin/kapacitord -config /etc/kapacitor/kapacitor.conf
Check the log in journalctl
Example - journalctl check
srp 21 14:22:18 algonquin systemd[1]: Started Time series data processing engine..
srp 21 14:22:18 algonquin kapacitord[29452]: '##:::'##::::'###::::'########:::::'###:::::'######::'####:'########::'#######::'########::
srp 21 14:22:18 algonquin kapacitord[29452]: ##::'##::::'## ##::: ##.... ##:::'## ##:::'##... ##:. ##::... ##..::'##.... ##: ##.... ##:
srp 21 14:22:18 algonquin kapacitord[29452]: ##:'##::::'##:. ##:: ##:::: ##::'##:. ##:: ##:::..::: ##::::: ##:::: ##:::: ##: ##:::: ##:
srp 21 14:22:18 algonquin kapacitord[29452]: #####::::'##:::. ##: ########::'##:::. ##: ##:::::::: ##::::: ##:::: ##:::: ##: ########::
srp 21 14:22:18 algonquin kapacitord[29452]: ##. ##::: #########: ##.....::: #########: ##:::::::: ##::::: ##:::: ##:::: ##: ##.. ##:::
srp 21 14:22:18 algonquin kapacitord[29452]: ##:. ##:: ##.... ##: ##:::::::: ##.... ##: ##::: ##:: ##::::: ##:::: ##:::: ##: ##::. ##::
srp 21 14:22:18 algonquin kapacitord[29452]: ##::. ##: ##:::: ##: ##:::::::: ##:::: ##:. ######::'####:::: ##::::. #######:: ##:::. ##:
srp 21 14:22:18 algonquin kapacitord[29452]: ..::::..::..:::::..::..:::::::::..:::::..:::......:::....:::::..::::::.......:::..:::::..::
srp 21 14:22:18 algonquin kapacitord[29452]: 2017/08/21 14:22:18 Using configuration at: /etc/kapacitor/kapacitor.conf
Check as well the log in the directory /var/log/kapacitor.
Example - kapacitor.log check
$ sudo tail -f /var/log/kapacitor/kapacitor.log
[httpd] 127.0.0.1 - - [21/Aug/2017:14:41:50 +0200] "POST /write?consistency=&db=_internal&precision=ns&rp=monitor HTTP/1.1" 204 0 "-" "InfluxDBClient" 1a122e03-866e-11e7-80f1-000000000000 375
[httpd] 127.0.0.1 - - [21/Aug/2017:14:41:50 +0200] "POST /write?consistency=&db=telegraf&precision=ns&rp=autogen HTTP/1.1" 204 0 "-" "InfluxDBClient" 1a401bb1-866e-11e7-80f2-000000000000 303
[httpd] 127.0.0.1 - - [21/Aug/2017:14:42:00 +0200] "POST /write?consistency=&db=_internal&precision=ns&rp=monitor HTTP/1.1" 204 0 "-" "InfluxDBClient" 200818be-866e-11e7-80f3-000000000000 398
[httpd] 127.0.0.1 - - [21/Aug/2017:14:42:00 +0200] "POST /write?consistency=&db=telegraf&precision=ns&rp=autogen HTTP/1.1" 204 0 "-" "InfluxDBClient" 20360382-866e-11e7-80f4-000000000000 304
[httpd] 127.0.0.1 - - [21/Aug/2017:14:42:10 +0200] "POST /write?consistency=&db=_internal&precision=ns&rp=monitor HTTP/1.1" 204 0 "-" "InfluxDBClient" 25fded1a-866e-11e7-80f5-000000000000 550
[httpd] 127.0.0.1 - - [21/Aug/2017:14:42:10 +0200] "POST /write?consistency=&db=telegraf&precision=ns&rp=autogen HTTP/1.1" 204 0 "-" "InfluxDBClient" 262be594-866e-11e7-80f6-000000000000 295
[httpd] 127.0.0.1 - - [21/Aug/2017:14:42:20 +0200] "POST /write?consistency=&db=_internal&precision=ns&rp=monitor HTTP/1.1" 204 0 "-" "InfluxDBClient" 2bf3d170-866e-11e7-80f7-000000000000 473
[httpd] 127.0.0.1 - - [21/Aug/2017:14:42:20 +0200] "POST /write?consistency=&db=telegraf&precision=ns&rp=autogen HTTP/1.1" 204 0 "-" "InfluxDBClient" 2c21ddde-866e-11e7-80f8-000000000000 615
[httpd] 127.0.0.1 - - [21/Aug/2017:14:42:30 +0200] "POST /write?consistency=&db=_internal&precision=ns&rp=monitor HTTP/1.1" 204 0 "-" "InfluxDBClient" 31e9b251-866e-11e7-80f9-000000000000 424
[httpd] 127.0.0.1 - - [21/Aug/2017:14:42:30 +0200] "POST /write?consistency=&db=telegraf&precision=ns&rp=autogen HTTP/1.1" 204 0 "-" "InfluxDBClient" 3217a267-866e-11e7-80fa-000000000000 288
Check for Kapacitor client activity in Influxdb.
Example - Influxdb check
sudo journalctl --unit influxdb.service | grep "Kapacitor"
srp 21 14:45:18 algonquin influxd[27308]: [httpd] 127.0.0.1 - admin [21/Aug/2017:14:45:18 +0200] "GET /ping HTTP/1.1" 204 0 "-" "KapacitorInfluxDBClient" 965e7c0b-866e-11e7-81c7-000000000000 21
srp 21 14:45:18 algonquin influxd[27308]: [httpd] 127.0.0.1 - admin [21/Aug/2017:14:45:18 +0200] "POST /query?db=&q=SHOW+DATABASES HTTP/1.1" 200 123 "-" "KapacitorInfluxDBClient" 965e89e5-866e-11e7-81c8-000000000000 570
srp 21 14:45:18 algonquin influxd[27308]: [httpd] 127.0.0.1 - admin [21/Aug/2017:14:45:18 +0200] "POST /query?db=&q=SHOW+RETENTION+POLICIES+ON+_internal HTTP/1.1" 200 158 "-" "KapacitorInfluxDBClient" 965fcf0f-866e-11e7-81c9-000000000000 308
srp 21 14:45:18 algonquin influxd[27308]: [httpd] 127.0.0.1 - admin [21/Aug/2017:14:45:18 +0200] "POST /query?db=&q=SHOW+RETENTION+POLICIES+ON+telegraf HTTP/1.1" 200 154 "-" "KapacitorInfluxDBClient" 96608b2b-866e-11e7-81ca-000000000000 1812
srp 21 14:45:18 algonquin influxd[27308]: [httpd] 127.0.0.1 - admin [21/Aug/2017:14:45:18 +0200] "POST /query?db=&q=SHOW+SUBSCRIPTIONS HTTP/1.1" 200 228 "-" "KapacitorInfluxDBClient" 96618c32-866e-11e7-81cb-000000000000 380
Verify that old tasks are once again visible and enabled.
Example - tasks check
$ kapacitor list tasks
ID Type Status Executing Databases and Retention Policies
cpu_alert_batch batch disabled false ["telegraf"."autogen"]
cpu_alert_stream stream enabled true ["telegraf"."autogen"]
Testing recording existing tasks and replaying the results is also recommended for checking the status of the newly upgraded Kapacitor service. Which tasks to record will depend on the specifics of the installation. Please see the Kapacitor API documentation for more details.
If these checks look correct, then the upgrade can be considered complete.
Was this page helpful?
Thank you for your feedback!
Support and feedback
Thank you for being part of our community! We welcome and encourage your feedback and bug reports for Kapacitor and this documentation. To find support, use the following resources: